Request Information Download PDF
Model NumberGT-G3085PWWWVV-X.X-C
DescriptionGT-G3085PWWWVV-X.X-C, ITE Power Supply, Enclosed-Metal, Single Output Power supply, , Input Rating: 90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz), Terminal Block, Output Rating: 100 Watts, 5-48V in 0.1V increments, Approvals:
Agency Documents
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITE
RoHS/RoHS2 Declaration
REACH Declaration
Conflict Minerals Declaration
Model Parameters
TechnologySingle Output Power supply
CategoryITE Power Supply
Input Voltage90 ~ 264VAC, 127 ~ 370VDC (47 ~ 63Hz)
I/P Amps (A)1.2A / 115VAC, 0.6A / 230VAC
Wattage (W)100
Vout Range (V)5-48
Ingress ProtectionIPX0
Size (mm)98 x 42 x 157.2
EnclosureUser-added image

Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GT-G3085P10005-C 520100 RFQ
GT-G3085P1007.5-C 7.513.5101.25 RFQ
GT-G3085P10012-C 128.5102 RFQ
GT-G3085P10013.5-C 13.57.5101.25 RFQ
GT-G3085P10015-C 156.7100.5 RFQ
GT-G3085P10024-C 244.2100.8 RFQ
GT-G3085P10027-C 273.8102.6 RFQ
GT-G3085P10048-C 481.9593.6 RFQ
UniversalAC input I Fullrange
• Built in active PFC function,PF > 0.90
• Green design,No-load power consumption < 0.1W
• Protection: Short circuit,Over load,Over voltage
Brown-out (Low AC Input Voltage)
• High operation temperature up to 70°C
• Withstand 2G vibration test
• 3 years warranty

DC Voltage Range: 5V 7.5\1 12V 13.5V 15V 24V 27V 48V
Rated Current 20A 13.5A 8.5A 7.5A 6.7A 4.2A 3.8A 1.95A
Current Range: 0-20A 0-13.5A 0-8.5A 0-7.5A 0 -6.7A 0-4.2A 0-3.8A 0 -1.95A
Rated Power: 100W 101.2W 102W 101.2W 100.5W 100.8W 102.6W 93.6W
Ripple & Noise (Max.): Note.2 100mVp-p 10DmVp-p 10QmVp-p 10DmVp-p 10QmVp-p 120mVp-p 12DmVp-p 20DmVp-p
Voltage Adj. Range: 4.5-5.5V 6.75-8.25V 10.8-13.2V 12.15-14.9V 13.5--16.5V 21.6-26AV 24.3--29.7V 43.2-52.8V
Voltage Tolerance: Note.3 ±2% ±1.5% ±1% ±1% ±1% ±1% ±1% ±1%
Line Regulation: ±0.5%
Load Regulation: ±0.5%
Setup, Rise Time: 1300ms, 100ms at full oad
Hold Up Time (Typ.): > 32ms /230VAC,> 10ms /115\/AC at fulload

Voltage Range: Note.4 90 ~ 264VAC, 127 ~ 370VDC
Frequency Range: 50/60Hz
Power Factor (Typ.):> 0.9/230VAC,> 0.98/115VAC at full load
Efficiency (Typ.): 83% 85% 85% 86% 88% 189% 189% 89%
AC Current (Typ.): 1.2A I 115VAC,0.6A /230VAC
Inrush Current (Typ.): 27A/115VAC,55A/230VAC
Leakage Current: < 2mA/230VAC

Over Load: >105% rated output power. Protection type: Hiccup mode
Over Voltage: 115- 150% rated output voltage. Protection type:latch-off mode
Over Temperature: 90 :1:5"C detect on NTC. ProtectiOn type:shut down o/p voltage, after temperahn goes down and re-power ON to recover

Working Temp.: -20- +70°C (Refer to output load de-rating curve) (Refer to output load de-rating curve)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp. & Humidity: -40 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient: ±0.02% / °C (0 ~ 50°C)
Vibration: 10 ~ 500Hz, 1G 10min. / 1cycle, period for 60min. each along X, Y, Z axes Compliance to IEC 60068-2-6-2007

Safety & EMC
Safety Standards: Certified UL 60950-1; EN 60950-1
Withstand Voltage: I/P-O/P: 3KVAC (4242VDC), I/P-FG: 1.5KVAC (2121VDC), O/P-FG: 0.5KVAC (707VDC), 1min
Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC
EMI Conduction & Radiation: Certified EN 55022; EN 61000-6-3
Harmonic Current: Certified EN 61000-3-2; EN 61000-3-3
EMS Immunity: Certified EN 61204-3; EN 55024; EN 61000-6-1, IEC 61000-4-2, 3, 4, 5, 6, 8, 11

MTBF: 691.81< HRS Certified MIL-HDBK-217F
Cooling: Air convection
Dimension (WxHxH)v 98x42x157.2 mm / 3.858x1.654x6.189 inch
Packing: 0.65kg; 24pcs / 16.6kg / 1.1CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. De-rating may apply in low input voltage. Please check the de-rating curve for more details.
5. In parallel connection, only one unit will operate if the total output load is less than 5% of the rated load condition.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
7. Conduct this test without enclosure.
Derating CurveUser-added image
Qty (ea.)/Carton24
Individual Box/Gift Box Size (mm)170*110*45
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)TBD
Label Width (mm)90.0
Label Height (mm)30.0
Input Configuration
DescriptionTerminal Block
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
215875244.2(4) Position Terminal Block

Request Info

Text us your inquiry