Open Frame ITE & Medical 60W Switching Power Supply Offers superior Isolation and high performance in a 2x4” package with a universal input of 90-264VDC and 5-48VDC Output in both Class I and Class II configurations, Model GTM43007B

GTM43007B represents the industry’s newest and lowest cost Open Frame 60W Power Supply family which is Internationally Certified and Approved for Class I or Class II operation and provides nearly complete global coverage for world export. The miniature 2x4” Industry standard footprint (101.6*50.8*22.5mm) ITE and Medical universal input switching power supply model GTM43007B is available in an open frame configuration. The high-density power supply has an input from 100-264VAC 50-60Hz and 600W Single Output with output options from 5V to 48VDC. The series has an average efficiency of 85. It also provides Overload, Short circuit, and Over Voltage. Input is via Molex 26-60-4030 type 3.96mm pitch input connector and two options for output connections are available, either a Molex 26-60-4040 3.96mm pitch connector or a Molex 22-11-2042 2.54mm pitch Molex type connector may be used, both of which are present on the product. This unit is certified to IEC60950-1 for ITE Equipment and 60601-1 for Medical and Healthcare applications. Medical units are certified 2xMOPP (means of patient protection) which refers to two independent systems of insulation protecting the patient from dangerous voltages. A single insulating component can get this rating based on extensive testing. This family of AC-DC converters is suitable for most applications requiring reliable DC Power such as medical devices, portable medical treatment and monitoring equipment and instruments, hospital equipment and fixtures, high power appliances, Test and Measurement equipment, Industrial controls, Elevators, consumer products, Telecom equipment, or battery chargers. Custom wire harnesses and loom kits available either assembled on the unit or packaged with it. This series is backward compatible and may be cross referenced to the following models: LPS54-M, ZPSA60-12, MINT1065D2475K01, LPS52, CFM60S150, LPS53, ZPSA60-24, MVAD040-24, NPS65-M, CFM60S480, LPS54, CFM60S360, ABC60-1015G, ABC40-1015G, NPS63-M, NPS64-M, ZPSA40-24, NPS62-M, MVAD040-12, MVAD065-05, CFM60M120, CFM60S050, ZPSA60-28, CFM60S300, NPS22-M, CFM60M240, CFM60S090, MVAD040-48, NPS24-M, NPS28-M, GLS53I, NPS25-M, CFM60S180, NPS23-M, MINT1065D1275K01, GLS53, CFM60S033, MINT1065A1575C01, CFM60S240, CFM60S120, LPS55, ABC60-1005G, CFM60M050, MINT1065D4875K01, PW-040B-1Y05, CFM60M480, CFM60M150, LPS53-M, LPS58, LPS55-M, LPS52-I, LPS53-I, MINT1065D1875K01, LPS52-M, LPS58-M, PW-060B-1Y12, PW-060B-1Y24, MINT1065D1575K01, MINT1065D1375K01, MINT1065A4875C01, MINT1065A2475C01, MINT1065A1275C01, MINT1065A1875C01, MINT1065B2475C01, ZPSA60-5, ZPSA60-3R3, ZPSA40-5, ZPSA60-48, ZPSA40-36, ZPSA60-36, ZPSA40-48, ZPSA40-30 Bespoke, customized enclosure colors, housing designs, output cord types and lengths, as well as customized packaging, ruggedized to various degrees of Ingress Protection, such as IP52 versions are available upon request. According to BS EN 60529 and IEC 529, IP52 signifies that the medical (60601-1) power supply is Protected against dust - limited ingress (no harmful deposit) as well as Protected against direct sprays of water up to 15°C from the vertical. Test reports and certifications as well, as variety of other customizations or options is available upon request. Made in USA or Made in China options available. Local China to China delivery is available upon request. Industry – Leading 5 year warranty Contact GlobTek for a wide range of other Internationally Certified Power Supplies and other Power – related products! 1-201-784-1000 or sales@globtek.us

Request Info