GT-96300-36VV-T3A-PP Desktop/External PoE, Passive Power Injector

GT-96300-36VV-T3A-PP, PoE, Passive Power Injector, Desktop/External, Single Port Passive Power Over Ethernet Midspan (Passive/Dumb PoE PSE) Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C6 AC Inlet Connector, Class I, Earth Ground  ( aka \GT-96300-36VV-T3A-PP, PoE, Passive Power Injector, Desktop/External, Single Port Passive Power Over Ethernet Midspan (Passive/Dumb PoE PSE) Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C6 AC Inlet Connector, Class I, Earth Ground ( aka "Mickey Mouse"), Output Rating: 36 Watts, Power rating with convection cooling (W) , 18-56V in 0.1V increments, Approvals: CB 62368; Patent US9838207B2; EAC; CCC; UKCA; LPS 62368; cETLus 62368-1; Morocco; S-Mark 62368; IRAM; WEEE; VCCI; Ukraine; China RoHS; RoHS; Level VI; CE; Class I; RCM; CB 60335;
Model NumberGT-96300-36VV-T3A-PP
Agency Documents
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITE
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITE
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declaration
RoHS/RoHS3 Declaration
Prop 65 Statement
REACH Declaration
Conflict Minerals Declaration
Model Parameters
TechnologySingle Port Passive Power Over Ethernet Midspan (Passive/Dumb PoE PSE) Power Supply AC Adaptor
CategoryPoE, Passive Power Injector
Input Voltage Range (V)100-240V~, 50-60 Hz
Max Input Current (A)1.0A
Max Output Power Rating (W)36
Output Voltage Range (V)18-56
EfficiencyUSA DOE Level VI / Eco-design Directive 2009/125/EC, (EU) 2019/1782
Ingress ProtectionIP40
Size (mm)107*55*36
Enclosure  User-added image
3D File Download
Rating Table
Model Number (Final ordering #/Part No to be defined)Output NumberVoltageAmps (Convection)Amps (Forced Air)Watts (Convection)Watts (Forced Air)RFQ
* (Final ordering #/Part No to be defined)
GlobTek’s GT-96300-3656 Active Power over Ethernet Midspan Injector offers a cost effective and reliable solution for remote powering of wireless LAN Access Points, voice over IP (VoIP) phones, security cameras, RFID readers and other IP terminals up to 36W, using existing network infrastructure. This injector is configured to provide 36W of power per port over two pairs (Mode B) in compliance with IEEE 802.3at standard.
The GT-96300-3656 Active PoE Injector is designed to function with and provide power to any IEEE 802.3at compliant PoE device.

- Withstands high energy EMI immunity events without going into latched shutdown state
- Enhanced 36W output power capability
- IEEE 802.3at detection, 2 Event classification, disconnect and overload protection
- LED user interface for “power good” and fault conditions
- Compliant to PoE+,  10/100/1000 Base-T data rates
- Universal input power from 100VAC to 240VAC
- Unique patented green design: Compliant to DoE Efficiency level VI requirement
- Full protection for over-voltage and over-current
- Compact 104 x 54 x 40 mm (w/o mounting flange)

- VoIP Phones
- VoIP Phone with Video
- Wireless Access Points
- Bluetooth Access Points
- Multi-Band Wireless Access Points
- Network Security Cameras
- Point of Sales
- Industrial Controllers
- Electronic Time Card Readers
- Building Security Systems
- Network Camera with Pan, Tilt and Zoom Features
- Electronic Signs
- RFID Readers
- Motion Sensors
- HVAC Controllers
- Magnetic Card Readers
- PDAs
- Digital Time clock


Input Voltage: 90-264 VAC (85-264VAC @ 85% of rated output power)
Input Line Frequency: 47-63Hz
Input Current: <1A RMS @ 90VAC Full Load
Inrush Current: 60A (typ.), cold start @ 25°C at 230VAC
No load Power: <100mW
Efficiency: >87.4% (typ.), 4-point average efficiency, @ full load/230 VAC
Turn on-delay: 1 second typical @ 115VAC
Input Line Protection: MOV transient protected
Hold-up time: 8ms typical at nominal input voltage and full load
Leakage current: <100µA
Isolation: 3000 VAC

Number of Ports: 1
Data Rates: Compliant to PoE+, 10/100/1000 Mbits/second Ethernet speed
Power Injection Method:

IEEE 802.3at “Midspan” Mode B, using pins 4 & 5 (DC+) and 7 & 8 (DC-)
                        Mode A configuration, using pins 1 & 2 and 3 & 6 available upon special request
            Please read our article Power over Ethernet (PoE) Mode A vs. Mode B for more information.
Port Voltage:  56VDC (nom.), measured between pins 4 & 5 and 7 & 8
Port Current: 0 to 640mA (max.)
Port Power:  36W (max.)
Port Voltage Regulation: Complies with IEEE 802.3at requirements
Port Voltage Ripple: Complies with IEEE 802.3at requirements
Port Voltage Transient Performance: Complies with IEEE 802.3at requirements
Port Overload Protection: Complies with IEEE 802.3at Requirements. Port will shut down during overload and auto recover when overload is removed.
Port Short Circuit Protection: Complies with IEEE 802.3at Requirements. Port will shut down during short circuit and auto recover when short is removed.
Port Power Disconnection Method: Automatic disconnect if < 10mA minimum load detected per IEEE 802.3at standard.


Green LED status indicator with four possible states:
            1. No light: No powered device detected at end of Ethernet cable
            2. Flashing at 1.5Hz: Detection (hand-shaking) in-process with Powered Device (PD)     

            3. Continuous light: Good connection with Powered Device (PD)
            4. Flashing at 10Hz: Over current condition

Temperature (Operating): -10°C to 40°C
Temperature (Storage): -30°C to 80°C
Humidity:  0% to 95% relative humidity, non-condensing
Altitude: Operating, up to 5000m


Housing: High impact plastic, 94V-0 polycarbonate, non-vented
Markings: Label, pad printed, and/or laser-etched onto the case

Dimensions: 104x54x40mm (w/o mounting flange)
Weight: 0.35lb (159g)

AC Input Mechanical Options:

            Desktop with C6, C8, C14 or C18 IEC Inlet.
            Hybrid housing (Desktop or inter-changeable blade wall plug-in), Class I or Class II input
Data and Data+Power Connector: Fully Shielded RJ45

Emissions: Complies with FCC Class B Part 15, EN55022 Class B
Immunity: Complies with the following;:

EN610000-6-2 (Industrial Level Immunity Compliance, extended levels shown in parenthesis)
EN 61000-4-2 ESD (+/-18KV Air, +/-8KV Contact, criteria A) (+/-20KV Air, +/-10KV Contact, criteria B)
EN 61000-4-3 Radiated Immunity
EN 61000-4-4 EFT (+/-2.5KV, criteria A) (+/-4KV, criteria B)
EN 61000-4-5 Surge   (+/-2KV Line-Line, +/-4KV Line to Gnd, criteria A)
EN 61000-4-6 Conducted Susceptibility
EN 61000-4-11 Voltage Dips and Interrupts
EN 61000-3-2 Harmonics, Class A

Compliant Safety Standards: See listings at end of this drawing for specifics

IEEE 802.3at: Product tested per the requirements of IEEE 802.3at

INTEROPERABILITY: Product's interoperability performance verified with various third
party PoE enabled systems. See table below.

1. Custom markings
2. Reduced output power rating
3. Compatibility to 24W-30W output power splitters using Data Link Layer Classification
4. High reliability PCB laminate with plated through holes for IPC610 Class 2 compliance
5. Special housing colors
6. 48V to 54V output voltage, contact GlobTek for availability

User-added image
Derating CurveUser-added image
Qty (ea.)/Carton48
Individual Box/Gift Box Size (mm)Egg Crate
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)410 x 450 x 195
Gross Weight (kg)
Label Width (mm)40
Label Height (mm)80
Input Configuration
DescriptionIEC 60320/C6 AC Inlet Connector, Class I, Earth Ground ( aka "Mickey Mouse")User-added image

Mates with IEC 60320/C5 Plug

 Standard International IEC 320/C5 Cordsets

Below are standard cordsets which are "not included" (unless stated above); these can be purchased separately or package with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material. 

Part Number / LinkCountryPlugConnectorLength (mm)Length (ft)
3021066F712(R)N. American (Type B)NEMA 5-15PIEC 320/C518806
1191068F0712(R)N. American (Type B)NEMA 5-15P HospitalIEC 320/C524598
2194262M0712(R)Argentina (Type I)IRAM 2073IEC320/C520506.7
2064262M0712(R)Australian (Type I)AS3112 / 3 PRONGIEC 320/C520006.6
204B4262M0712(R)Brazil (Type N)BRAZILIEC 320/C520006.6
6023592M5712(R)China (Type I)CCC GR2099IEC 320/C525008
23144262M0712(R)Europe (Type E)CEE 7/7IEC 320/C520506.6
2313K3432M0712(R)Korea (Type F)KS C 8305IEC 320/C520006.6
205IN4262M0712(R)India (Type D)India IS 1293 (also known
as IA16A3 or BS546)
377C4262M0712(R)Israel (Type H)ISLIEC320/C520506.7
23024262M0712(R)Italy (Type L)CEI 23-16/VIIIEC 320/C520006.6
3003316F0712(R)Japan (Type B)JIS 8303 / 3 PINSIEC 320/C518306
3021066F0712ULPSE(R)Japan / USA (Type B)JIS 8303 / 3 PINS +
NEMA 5-15P
IEC 320/C518306
2054262M0712(R)S. Africa (Type D)South Africa SABS164-1   (6A type plug)IEC320/C520506.7
2084262M0712(R)S.Africa (Type M)South Africa SABS164-1 (16A type plug)IEC 320/C520006.6
23214262M0712(R)Switzerland (Type J)SEV 1011 ( EL 203)IEC 320/C520006.6
3003316F0712(R)Taiwan (Type B)BSMIIEC 320/C520006.6
6104262M0712(R)UK, Hong Kong, Singapore, Gulf States (Type G)BS1363IEC 320/C520006.6

Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

Request Info