BL2600C18654S1P Battery Pack

GlobTek’s new BL2600C18654S1P advanced Li-on battery pack is the reliable choice for your portable power requirements

GlobTek’s  advanced Lithium-Ion Battery Pack, designed for high performance and safety. This pack features a rated capacity of 2600mAh, utilizing four 18650 Lithium-ion cells in a 4S1P configuration, which provides a nominal voltage of 14.6V. It supports a continuous discharge current of 1C (2.6A), making it suitable for a variety of applications requiring steady power output. The integration of an SMBus-compatible fuel-gauge onboard management system (BMS) ensures precise monitoring and management of battery health and charge status. For convenience, the pack includes a built-in charger that simply requires an application of DC voltage between 18V–27V for recharging. It operates efficiently in a wide temperature range, from 0°C to 45°C while charging and can discharge from -20°C to 45°C, ensuring versatility in various environmental conditions. With dimensions of 2.64” x 2.99” x 1.06” (67.0 x 76.0 x 27mm), this compact pack is both powerful and portable. Compliant to IEC 62133-2:2017 and UN38.3 standards

 

This battery pack's combination of high energy density, built-in management system, and compliance with safety standards makes it versatile across applications needing a balance between power, size, and safety.

Features

  • Pack rated capacity : 2600mAh
  • Cell size/type :18650 Lithium-ion
  • Cell configuration: 4S1P
  • Continuous discharge current : 1C (2.6A)
  • Nominal pack voltage: 14.6V
  • Built-in charger, just apply DC voltage
  • Charging source input voltage : 18V–27V
  • SMBus-compatible fuel-gauge onboard management system (BMS)
  • 0°C–45°C operating ambient (in charge)
  • -20°C–45°C operating ambient (in discharge)
  • Size: 2.64” × 2.99” × 1.06” (max.) (67.0 × 76.0 × 27mm max.)
  • Safety: IEC 62133-2:2017 / UN38.3
 

 

 

Applications

  • Portable electronics
  • Medical devices
  • Drones
  • Small motorized equipment
  • Emergency lighting & backup systems
  • Robotics & automation
  • Power tools
  • Hand-held industrial and commercial equipment
  • Renewable energy systems


 

 Key Search Terms

  • 18650 lithium-io battery pack
  • 4S1P lithium-ion battery pack
  • Medical battery pack
  •  IEC 62133-2:2017 / UN38.3
  • On-board fuel gauge
  • Battery packs 2600 mAh

BL2600C186502S1PFQU Specifications

BL2600C186502S1PFQU
BL2600C186502S1PFQU, , Battery Cylindrical Can, Battery Li-Ion, , Input Rating: , , Output Rating: Watts, Power rating with convection cooling (W) , V in 0.1V increments, Approvals: UN38.3 (pending); IEC 62133 (pending); UL2054;BL2600C186502S1PFQU, , Battery Cylindrical Can, Battery Li-Ion, , Input Rating: , , Output Rating: Watts, Power rating with convection cooling (W) , V in 0.1V increments, Approvals: UN38.3 (pending); IEC 62133 (pending); UL2054;
Information
Guidelines and cautions, Safety Notes, and Safety Precautions published on GlobTek’s website
Model NumberBL2600C186502S1PFQU
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttps://cs.globtek.info/ec_declaration?id=a0O3a00000NprjxEAB
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITE
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://cs.globtek.info/Morocco_SDoC_Declaration?id=a0O3a00000NprjxEAB
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0O3a00000NprjxEAB
Prop 65 Statementhttps://www.globtek.com/r2/PH7CNf
REACH Declarationhttps://www.globtek.com/r2/eM2co8
Conflict Minerals Declarationhttps://www.globtek.com/r2/vZY8R5
Model Parameters
TypeBattery Cylindrical Can
TechnologyBattery Li-Ion
ChemistryLi-Ion
Cell Rated Capacity (mAh)2600
Cell Nominal Voltage3.65
Cell GeometryCylindrical
Cell Length68
Cell Width
Cell Height
Cell Diameter20
Rating Table
Model Number (Final ordering #/Part No to be defined)Voltage (V)Current (A)Power (W)RFQ
UL2054 BL2600C186502S1PFQU (pending)*UL2054 for BL2600C186502S1PFQU (pending)
IEC 62133-2:2017, IEC 62133-2:2017/AMD1:2021 (IEC62133-2) for BL2600C186502S1PFQ*IEC 62133-2:2017, IEC 62133-2:2017/AMD1:2021 (IEC62133-2) for BL2600C186502S1PFQU (pending)
* (Final ordering #/Part No to be defined)
Specifications
GENERAL SPECIFICATION:     
BATTERY WITH SAFETY CIRCUIT AND PLASTIC HOUSING    
CELL: LR1865SK    
PCM:BQ40Z50    
NTC: N/A    
ID: N/A    
CONFIGURATION: 2S1P    
WEIGHT: APROX 100 g    
2.ELECTRICAL SPECIFICATION FOR PACK:     
RATED CAPACITY: 2600 mAh    
NOMINAL VOLTAGE: 7.3V    
WATT-HOUR RATING: 18.98Wh    
CHARGING METHOD: CONSTANT CURRENT + CONSTANT VOLTAGE    
MAX. CHARGE VOLTAGE [V]: 8.4V Max (8.2V Max recommended for maximizing life and health of battery cells and preventing premature failure)    
CHARGE CURRENT: 0.3C recommended, 0.5C Maximum. For a deeply discharged cell with a voltage of 3.0V or less, a pre-charge current equal to or less than 0.1C is highly recommended.    
RECOMMENDED CHARGE CUT OFF:When charge rate falls to 10% of bulk charge or by secondary charge termination such as a Timer as specified by customer which best suits the application and charging method to be used.    
MAX. CONTINUOUS DISCHARGE CURRENT: 1.5C    
RECOMMENDED DISCHARGE CUT OFF: 3.0V/Cell. GlobTek recommends a customer system level permanent fail protection if the cell voltage drops to 2.50V    
INTERNAL IMPEDANCE: ≤150 mΩ    
EXP. CYCLE LIFE:>300 CYCLES > 80% OF INITIAL CAP    
CELL PROTECTION:     
OVER CHARGE DETECTION:4.25 ±0.02V/Cell    
 (2 sec. DELAY, RESUME 4.10 ± 0.02V/cell )    
OVER DISCHARGE DETECTION: 2.75 ±0.05V    
 (2 sec. DELAY, RESUME 3.0±0.05V)    
OVER CURRENT DETECTION: 6A (5 sec. DELAY) SHORT CURRENT DETECTION: 500us DELAY    
3. AMBIENT CONDITIONS     
TEMPERATURE RANGE:     
CHARGE: 0 TO +45°C    
DISCHARGE:-20 TO +60°C    
CHARGE RETENTION/STORAGE [%]:1 YEAR AT -20 TO +20°C >80%    
 3 MONTHS AT -20 TO +40°C >80%    
 1 MONTH AT -20 To +60°C >80%    
HUMIDITY:60 ±25%RH    
4.ENVIORMENTAL AND SAFETY     
Please review quarterly and follow HANDLING AND SAFETY PRECAUTIONS FOR LiIon & LiPolymer.    
5. CELL REGULATORY APPROVALS:     
UL:UL1642    
IEC 61960 Cell designation and marking:2INR19/66    
Derating Curve
Qty (ea.)/Carton
Individual Box/Gift Box Size (mm)
Individual Box/Gift Box Color
Master Carton Size (mm)TBD
Gross Weight (kg)
Label Width (mm)
Label Height (mm)
Input Configuration
Description
Approvals

Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

LogoDescription

 		UN38.3 for BL2600C186502S1PFQU

 		IEC 62133-2:2017, IEC 62133-2:2017/AMD1:2021 (IEC62133-2) for BL2600C186502S1PFQU (pending)

 		UL2054 for BL2600C186502S1PFQU (pending)
Popular Products (Stock items)
SKUVolts OutCurrent Out (Amps)ConnectorRFQSample RequestDistributor Stock (Click to order)
BL2600C186502S1PFQU
0.00.0.36

Guidelines and cautions, Safety Notes, and Safety Precautions published on GlobTek's website

https://www.globtek.com/en/safety-documents/battery-pack-safety-guidelines-cautions

The purchaser of GlobTek battery pack products (Customer) agrees that they are a "Sophisticated user" who understands battery technology and that it is their sole responsibility to determine suitability of the product described for their application and to take precautions for protection against any hazards attendant to the handling and use of the product. GlobTek products are only designed for professional use and integration by companies into their products and may not be used by consumers directly. GlobTek provides batteries and battery packs as a component of an end system.

The acceptance of GlobTek specifications, the information on this page and use of the product(s) described in this or other GlobTek documents indicate that the product was qualified for use (tested and/or sample waiver signed), and the acceptance and binding of the customer to GlobTek terms and conditions, which supersede all other agreements, terms and conditions https://www.globtek.com/about/terms-and-conditions

Lithium Ion batteries are inherently dangerous. Continuous usage or charging without allowing the battery to discharge is a hazard.

FIRE HAZARD: This like all Li-Ion battery packs must be regularly discharged and charged. it is not recommended to be kept on permanent fullcharge and in a full state of charge.