Preferred ratings shown below. Custom output voltages available in 0.1V increment from the minimum voltage listed to the maximum voltage listed; contact sales.
Model Number (Final ordering #/Part No to be defined)
Voltage
Amps (Convection)
Amps (Forced Air)
Watts (Convection)
Watts (Forced Air)
LPS
RFQ
GTM962253PWWWVV-P3-XXXX
CUSTOM
* (Final ordering #/Part No to be defined)
Specifications
Features
High power density potted construction
Low conducted & radiated EMI: Class B without external filters or ferrites (all input configurations, into resistive load)
Class I, Class II, or Class II with Functional Earth input configurations
ITE/ICT and medical (2 x MOPP) certified (suitable for Type-B or Type-BF applications)
± 2.0% (worst case, set point + load/line regulation)
Load Regulation:
± 0.5% (measured at connector)
Line Regulation:
± 0.2% (measured at connector)
Ripple:
1% pk-pk (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW)
Transient Response:
<5% deviation (with 25% load step), recovery to within 1% in 1ms
Startup Overshoot:
<5% (full load)
Hold-up Time:
10ms min. (full load)
Aux Output Voltage Regulation:
12V ± 2V (10V min. / 14V max.), for 0A ≤ IAux ≤0.8A
Aux regulation guaranteed when main output power ≥ 25% of 140W rating (~34W).
For main output power < 25%, aux output voltage may drop to < 50% of nominal rating, depending on aux output load. Please check with your system. For main output = 12V, aux output voltage is same as main output.
Custom aux output voltages (5V to 12V), available for main output voltages from 12-24V
Derating Curve
Qty (ea.)/Carton
20
Individual Box/Gift Box Size (mm)
Cellular Packag
Individual Box/Gift Box Color
Cellular Packag
Master Carton Size (mm)
450 x 461 x 182
Gross Weight (kg)
16
Label Width (mm)
TBD
Label Height (mm)
TBD
Input Configuration
Description
Contact GlobTek for customization requests on any type of cable in any customer specified lengths.
Approvals
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.
Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.
Logo
Description
Medical 4th Ed.
EN/IEC 60601-1-2, 4th Edition (Please visit EMC reports for further info)
IP68
Ingress Protection: ?IP68 to IEC60529:2001 Totally dust tight and Protected against long periods of immersion under pressure
Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
Attention Mark / Refer to operating manual for operating and service instructions
No Logo Applicable
CB for IEC 60601-1:2005 (Third Edition) + CORR. 1 (2006) + CORR. 2 (2007) + AM1 (2012) or IEC 60601-1 (2012 reprint) (Ed 3.1) up to 48V only (pending)
No Logo Applicable
IEC 60335-1:2010+A1+A2
No Logo Applicable
CB for IEC 62368-1:2014 (Second Edition)
CCC GB17625.1-2012, GB4943.1-2011, GB/T9254-2008
CE Certification
Audio/Video, Information And Communication Technology Equipment - Part 1: Safety Requirements [UL 62368-1:2014 Ed.2] Audio/Video, Information And Communication Technology Equipment - Part 1: Safety Requirements [CSA C22.2#62368-1:2014 Ed.2]
CHINA SJ/T 11364-2014, China RoHS Chart: http://www.globtek.com/pdf/F-GT-DJD-8.4.1-006%20China%20RoHS%20Declaration%205-20-22.pdf
WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
