Information
Model NumberGTM86100-10VV-W2-USB2C
Agency Documentshttp://www.globtek.info/certs/GTM86100/
CE EC-Declaration for Medicalhttps://cs.globtek.info/ec_declaration?id=a0OVv000001dv7VMAQ
CE EC-Declaration for Industrial/Commercial/ITEhttps://cs.globtek.info/ec_declaration?id=a0OVv000001dv7VMAQ
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for Medicalhttps://cs.globtek.info/ukca_declaration?id=a0OVv000001dv7VMAQ
UKCA-Declaration for Industrial/Commercial/ITEhttps://cs.globtek.info/ukca_declaration?id=a0OVv000001dv7VMAQ
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://cs.globtek.info/Morocco_SDoC_Declaration?id=a0OVv000001dv7VMAQ
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0OVv000001dv7VMAQ
Prop 65 Statementhttps://www.globtek.com/r2/PH7CNf
REACH Declarationhttps://www.globtek.com/r2/eM2co8
Conflict Minerals Declarationhttps://www.globtek.com/r2/vZY8R5
Model Parameters
TypeWall Plug-in
TechnologyAC/DC Switching Adapter with USB Power Supply AC Adaptor
CategoryICT / ITE / Medical Power Supply
Input Voltage Range (V)100-240V ̴ , 50/60Hz
Max Input Current (A)0.3A
Max Output Power Rating (W)10
Output Voltage Range (V)5-5.2
EfficiencyUSA DOE Level VI / Eco-design Directive 2009/125/EC, (EU) 2019/1782
Ingress Protection
Size (mm)56.5*23.9*38.9 +/-1.0
Enclosure
User-added image

 
3D File Downloadhttps://www.globtek.com/file/dl/gtm86100-10vv-w2_asm.sgtm86100-10vv-w2-usb_asm.stp
Rating Table
Model Number (Final ordering #/Part No to be defined)Voltage (V)Current (A)Power (W)RFQ
GTM86100-1005-W2-USB2C*52.00010
GTM86100-1005.1-W2-USB2C*5.11.96010
GTM86100-1105.2-W2-USB2C*5.22.10010.92
* (Final ordering #/Part No to be defined)
Specifications

Input

Input Voltage:Specified: 85-264VAC, Nameplate: 100-240VAC
Input Frequency:Specified: 47-63Hz, Nameplate: 50-60Hz
No Load Input Power:<75mW @ 230VAC (EU CoC Tier 2 compliant)
Inrush Current:30A @ 115VAC, 60A @ 230VAC typ. (at peak of AC line, cold start)
Efficiency:78.7% min. (CEC&DOE Level VI compliant), 79.0% min. (EU CoC Tier 2 compliant)

Output

Turn-on Delay:3 seconds max.
Rise-Time:100ms max.
Output Regulation± 5% (measured at the end of a 1.2m long 20AWG USB cordset)
Ripple:100mV (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW)
Transient Response:10% max. deviation (with 25-75% load step), 1ms max. recovery time 
Hold-up Time:5ms min. (100VAC and full load)

Protections

Input Protection:MOV transient suppressor, input line fusing
Over-Current Protection:110% to 150%, auto-restart
Over-Voltage Protection:10VDC max. (Zener clamp)
Short-Circuit Protection:Auto-restart
Over-Temperature Protection:Auto-restart, on-chip temperature sensor

Environmental

MTBF:1,500,000 hours @ 25°C ambient, full load (Telcordia SR-332, Issue 3)
Operating Temperature:0°C to 40°C (full load)
Operating Humidity:20% to 85% relative humidity, non-condensing
Storage Conditions:-20°C to 60°C / 5% to 95% relative humidity, non-condensing
Cooling:Natural convection

Safety

Certifications:IEC60601-1
IEC60601-1-11
IEC62368-1
Dielectric Withstand Voltage:4000VAC or 5656VDC (primary-to-secondary)
5mA, 1 minute
Output Touch Current:NC: 100µA max.
SFC: 500µA max.
Earth Leakage CurrentN/A, Class II input (No protective earth pin, therefore earth leakage is not measured)
Means of Protection:2 x MOPP (primary-to-secondary)

EMC

Certifications:IEC60601-1-2
EN55032 (CISPR32)
EN55035 (CISPR35)
Conducted Emissions:Class B, FCC Part 15, Class B (with resistive load)
Radiated Emissions:Class B, FCC Part 15, Class B (with resistive load)
Harmonic Current Voltage Distortion:EN61000-3-2, Class A
Voltage Fluctuations/Flicker:EN61000-3-3
Electrostatic Discharge (ESD) Immunity:EN61000-4-2, 8KV contact discharge, 15KV air discharge, Criterion A
Radiated RF Immunity:EN61000-4-3, 10V/m (80MHz-2.7GHz), Table 9, 9-28V/m (385MHz-5.78GHz ), Criterion A
EFT/Burst Immunity:EN61000-4-4, 2KV/100kHz., Criterion A
Line Surge Immunity:EN61000-4-5, 2KV differential, Criterion A
Conducted RF Immunity:EN61000-4-6, 3VRMS, 80% 1KHz AM, Criterion A
Power Frequency Magnetic Field Immunity:EN61000-4-8, N/A
Voltage Dip Immunity:EN61000-4-11, Criterion A/B

Enclosure

Housing:High impact plastic, PC+ABS 94V0, non-vented
Markings:Laser marked or adhesive-backed label

 

Derating CurveUser-added image
Qty (ea.)/Carton300
Individual Box/Gift Box Size (mm)43(L)*30(W)*75
Individual Box/Gift Box Color43(L)*30(W)*75
Master Carton Size (mm)485 x 335 x 240
Gross Weight (kg)12
Label Width (mm)37.0
Label Height (mm)19.0
Input Configuration
DescriptionNEMA 1-15P, North America Blades, Class II 2 ConductorsAll NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. NEMA 1-15P plugs have two parallel flat blades, 0.25 inches (6.35 mm) wide, 0.06 inches (1.524 mm) thick, 0.625-0.718 inches (15.875–18.256 mm) long, and spaced 0.5 inches (12.7 mm) apart.
Output Configuration
Common output connector options:
Click to add to your request.
L Type (Coaxial 5.5x2.5mm plug)
C Type (Coaxial 5.5x2.1mm plug)
K Type (Coaxial 3.5x1.3mm plug)
LL Type (5.5x2.5mm Locking 760k type)
CL Type (5.5x2.1mm Locking S761k type)
Magnetic Connector
L Type (Coaxial 5.5x2.5mm plug)C Type (Coaxial 5.5x2.1mm plug)K Type (Coaxial 3.5x1.3mm plug)LL Type (5.5x2.5mm Locking 760k type)CL Type (5.5x2.1mm Locking S761k type)Magnetic Connector
YL3 Type (KPPX-3P)
YL4 Type (KPPX-4P)
EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)
MSB Type (Micro USB)
Custom design
YL3 Type (KPPX-3P)YL4 Type (KPPX-4P)EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)MSB Type (Micro USB)Inquire for custom design

Comprehensive list of GlobTek output cordset options

Contact GlobTek for your specific requirements or custom solutions.