Name: GTM91120-30VV-T2
Brand: GlobTek

Request Information Download PDF Configure Output Connector

Information

Model Number

GTM91120-30VV-T2

Description

GTM91120-30VV-T2, ITE / Medical Power Supply, 60601-1-4th Ed. , Wall Plug-in+Desktop Combination, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, IEC 60320/C8 AC Inlet connector, Output Rating: 30 Watts, 5-48V in 0.1V increments, Approvals: S-Mark SIQ CE cUL LPS CB EN/IEC 60335-1 RoHS Level V CE China RoHS PSE WEEE Double Insulation VCCI Ukraine FCC SIQ CB CB CCC cRUus CE RCM S-Mark IEC/EN 60601-1 CE ETL CB PSE PSE PSE PSE GS IEC 61558-1 IP40 IP52 Ta:40°C

Agency Documents

http://www.globtek.info/certs/GTM91120-T2%20-T3A%20-FW/

CE EC-Declaration for Medical

http://globtek.force.com/models/ec_declaration?id=a0Oa000000C2VkdEAF

CE EC-Declaration for Industrial/Commercial/ITE

http://globtek.force.com/models/ec_declaration?id=a0Oa000000C2VkdEAF

CE EC-Declaration for Household

Contact GlobTek for more information

RoHS/RoHS3 Declaration

https://www.globtek.com/pdf/rohs_cert/a0Oa000000C2VkdEAF

REACH Declaration

https://www.globtek.com/pdf/iso_certificates/REACH.pdf

Conflict Minerals Declaration

https://www.globtek.com/pdf/conflict-minerals.pdf

Model Parameters

Type

Wall Plug-in+Desktop Combination

Technology

Regulated Switchmode AC-DC Power Supply AC Adaptor

Category

ITE / Medical Power Supply

Input Voltage Range (V)

100-240V~, 50-60 Hz

Max Input Current (A)

1.5A

Max Output Power Rating (W)

Output Voltage Range (V)

5-48

Efficiency

Ingress Protection

IP52, IP54 Option available

Size (mm)

(L)101.77x(W)47.47x(H)36.7

Enclosure

Units shipped without an installed input plug have a "desktop insert" installed.

Rating Table

Model Number (Final ordering #/Part No to be defined)	Voltage	Amps (A)	Watts (W)
GTM91120-2007.5-2.5-T2*	5	4	20
GTM91120-3007.5-1.5-T2*	6	3.75	22.5
GTM91120-3007.5-T2*	7.5	3	22.5
GTM91120-2510.5-1.5-T2*	9	2.8	25.2
GTM91120-3010.5-1.5-T2*	9	2.77	24.93
GTM91120-3010.5-1.4-T2*	9.1	3.3	30.03
GTM91120-3010.5-1.2-T2*	9.3	3.2	29.76
GTM91120-2510.5-0.9-T2*	9.6	2.6	24.96
GTM91120-3014.5-2.5-T2*	12	2.5	30
GTM91120-1714.5-1.5-T2*	13	1.3	16.9
GTM91120-3019.5-4.5-T2*	15	2	30
GTM91120-3019.5-1.5-T2*	18	1.66	29.88
GTM91120-3019.5-0.5-T2*	19	1.57	29.83
GTM91120-3024-T2*	24	1.25	30
GTM91120-2736-9.0-T2*	27	1	27
GTM91120-3036-6.0-T2*	30	1	30
GTM91120-3036-T2*	36	0.83	29.88
GTM91120-3048-T2*	48	0.625	30

* (Final ordering #/Part No to be defined)

Specifications

A) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
2. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
3. Output Regulation: +/- 5% measured at the output connector
4. Line Voltage Regulation: +/- 2% typical measured at full load
5. Output Ripple (Vp-p): +/-2% maximum, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector
Optional low ripple option available (RFP4579)
6. Turn-ON/OFF Overshoot: 5% maximum, 500uS typical recovery time for 25% to 50% step load
7. Turn-ON Delay: 3 Seconds, maximum @ full load, nominal line
8. Hold-Up Time: 8 mS typical @ nominal input voltage and full load
9. Inrush Current: 60A maximum cold start @ 240Vac input
10. Switching Frequency: 100 KHz typical

B) PROTECTION
1. Over-Voltage: Protected with a Zener diode clamp across the output
2. Short Circuit: Hiccup with auto recovery
3. Over-load: Hiccup with auto recovery
4. Input Protection: Input line and neutral fusing

C) SAFETY
1. Dielectric Withstand Voltage: 5656Vdc from primary to secondary
2. Earth Leakage Current: N/A for Class II units, there is no PE Ground pin, so Earth Leakage current is not measured
3. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition)

D) OTHER:
1. MTBF: 200,000 Hours @ 25°C ambient temperature
2. Operating Temperature: 0°C to 40°C ambient temperature
3. Humidity: 0% to 90% relative humidity
4. Storage Temperature: -10°C to 80°C
5. Cooling: Convection
6. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

E) ENCLOSURE
1. Housing: High impact plastic, 94V0 polycarbonate, non-vented
2. Size: (L)101.73 x (W)46.47 x (H)38.2 +/-1.0 mm
3. Markings: Label and/or Pad Printed and/or Molded in the case
4. LED: Standard GREEN color to indicate power out

Derating Curve

Qty (ea.)/Carton

Individual Box/Gift Box Size (mm)

142*62*60

Individual Box/Gift Box Color

White

Master Carton Size (mm)

442 x 330 x 275

Gross Weight (kg)

15.2

Label Width (mm)

37.5

Label Height (mm)

33.5

Input Configuration

Description

IEC 60320/C8 AC Inlet connectorBlade Insertion Instructions
R-Blade Style Instruction Video

User-added image

Mates with IEC 60320/C7 Plug

This series of Interchangeable Blade products may be used with Proprietary Interchangeable Blades as described below or with standard international power cords.

Optional INPUT BLADES: R-Socket: below are available blades configurations which are "not included" (unless stated above); may be purchased separately, packaged with power supply, or as a separate "R-KIT" if specified

1. Class II model NEMA 1-15P AC power plug with 2 prongs, R-NA-2(R)

2. Australian AS 3112 configuration: SAA 2 pins Class II, R-SAA-2(R)

3. UK BS 1363 configuration: UK 2 pins (dummy Ground) Class II, R-UK-2(R)

4. European CEE 7/16 configuration: Europlug 2 PINS, Class II, R-EU-2(R)
5. China GB 2099 configuration: 2 blades, Class II; CN P/N:R-CN-2(R)
6. Desktop Insert
Kits
05. R-KIT: 1,2,3,4 above
06. R-KIT-INTL: 2,3,4 above

User-added image

Standard Cordsets
Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.

Standard International IEC 320/C7 Cordsets

4511116F703A(R)	N. American, Type A	NEMA 1-15P	IEC 320/C7	1830	6
5014112M703A(R)	Australian	AS 3112	IEC 320/C7	2000	7
2094112M703(R)	Argentina	IRAM 2063	IEC 320/C7	2000	7
4533501M8703(R)	China	GB 2099.1	IEC 320/C7	1830	6
2074112M703A(R)	European, Type C	CEE 7/16	IEC 320/C7	2000	7
451J3401M8703(R)	Japan	JIS 8303	IEC 320/C7	1830	6
6104112M703A(R)	UK, Type G	BS1363	IEC 320/C7	2000	7
2044112M703®	Korea	KS C8305	IEC 320/C7	2000	7
4033401M8703A(R)	Taiwan	CNS690	IEC 320/C7	1830	6
207B4111M8703(R)	Brazil	NBR14136	IEC 320/C7	1800	6

Output Configuration

Common output connector options:
Click to add to your request.


L Type (Coaxial 5.5x2.5mm plug)	C Type (Coaxial 5.5x2.1mm plug)	K Type (Coaxial 3.5x1.3mm plug)	LL Type (5.5x2.5mm Locking 760k type)	CL Type (5.5x2.1mm Locking S761k type)	Magnetic Connector

YL3 Type (KPPX-3P)	YL4 Type (KPPX-4P)	EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)	MSB Type (Micro USB)	Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals

Logo	Description


	Book 60335 up to 36 Volts
	60601-1 3rd Operating Instructions
	TEST REPORT IEC 61558-2-16 Standard EN 61558-2-16:2009 + A1:2013 used in conjunction with EN 61558-1:2005 + A1:2009 (DIN EN 61558-2-16:2014-06)
No Logo Applicable	CB report IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007) and or EN 60601-1:2006 3rd Edition including 2MOOP requirements
No Logo Applicable	IEC 60335-1:2010 (Fifth Edition) incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013
No Logo	CB Certificate IEC 60950-1:2005 (2nd Edition), Am 1: 2009, CB report IEC 60950-1:2005 (2nd Edition), Am 1: 2009 and EN 60950-1:2006 + Am 1:2010 + Am 11:2009 + Am 12:2011
No Logo Applicable	CB to 60335-1 5th Edition (Safety of Household and Similar Electrical Appliances, Part 1: General Requirements) CB Report/ Certificate IEC 60335-1:2010 Up to 36 volts only
	CCC to GB4943. 1-2011; GB9254-2008; GB17625. 1-2012 with Tropical and Altitude up to 5000 m approval.
	CE Mark: tested to comply with EN 55032:2012+AC:2013, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55024:2010, EN 60601-1-2:2015
	CE Certification CE Mark: tested to comply with EN 55032.2012+AC.2013 EN 61000-3-2.2014 EN 61000-3-3.2013 EN 60601-1-2.2015 EN 55024.2010
	CE Mark: tested to comply with EN55022:2006/A1:2007 Class B, EN610003-2, EN610003-3 including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6N EN61000-4-11; EMI: Complies with EN55011 CLASS B and FCC Part 15B - On label or Molded in case
	AAMI ES60601-1:2005 +A1 - Medical Electrical Equipment - Part 1: General Requirements CAN/CSA-C22.2 No.60601-1:14, Third Edition Issued: 2014/03/01 - Medical Electrical Equipment - Part 1 IEC 60601-1-11 Issued: 2015/01/20 Ed. 2 Medical Elec. Equip.
	CHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
	cRUus UL Recognized Component E172861 3rd Edition w-RM ANSI-AAMI ES60601-1 (2005 + C1:09 + A2:10) and CAN-CSA-C22.2 No. 60601-1 (2008)
	UL60950-1, cULus to UL 60950-1, 1st Edition, 2007-10-31 and CSA C22.2 No. 60950-1-03, 1st Edition, 2006-07

	Certification # TC RU AR46.B.69004 Custom Union of Russia, Belarus and Kazakhstan
	FCC PART 15 CLASS B
	Fuse 60335 T3.15A 250VAC Up to 36 volts
Ta:40°C	IEC 61558-1 Maximum Ambient Temperature, Max 40°C
	IEC/EN60335-1 Up to 36 volts
	IEC/EN60601-1
	IEC/EN60950-1
	Indoor Use Only - Mark is on the label or Molded in the case
IP40	Ingress Protection: IP40 to IEC60529:2001 Protection against granular foreign bodies (with I/P cord)
IP52	Ingress Protection: IP52 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against direct sprays up to 15 degrees from the vertical (with R-Blades)
	JAPAN TUV R-PSE, Cert. No. JD 50313285, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
	JAPAN TUV R-PSE, Cert. No. JD 50313285, to J60950-1(H26) , J55022(H22),J3000(H25)[DC15≤ 30V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
	JAPAN TUV R-PSE, Cert. No. JD 50313285, to J60950-1(H26) , J55022(H22),J3000(H25)[DC30≤ 60V]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
	JAPAN TUV R-PSE, Cert. No. JD 50314327, to J60950-1(H26) , J55022(H22),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/
	Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
LPS	Limited Power Source
	JAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
	RCM certificate SAA-161679-EA; Australia and New Zealand Regulatory Compliance, Mark (http://rcm.standards.org.au/rcmfaq/rcmfaq.htm
RoHS	Specifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
	IEC 60601-1:2005+A1 EN 60601-1:2006+A1:2013+A12:2014 IEC 60601-1-11:2015 EN 60601-1-11:2015
	Semko S-Mark-Cert- EN60950-1
	Serial Number Information
IEC/EN60335-1	SIQ IEC/EN 60335-1 (Safety of Household and Similar Electrical Appliances, Part 1: General Requirements) up to 36 volts
IEC/EN61558-1	EN 61558-2-16:2009 + A1 :2013 EN 61558-1 :2005 + A 1 :2009
	Transformer Symbol IEC 61558-1 SMPS Short-Circuit –Proof Safety Isolating Transformer
	Transformer Symbol IEC 61558-1 SMPS Switch Mode Power supply
	Ukraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
	Japan: Voluntary Control Council for Interference (VCCI)
	WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case

Popular Products

SKU	Volts Out	Current Out (Amps)	Connector
618081	12	2.5	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
618582	12	2.5	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
618607	12	2.5	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
102402	12	2.5	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
129142	12	2.5	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
129143	12	2.5	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
168697	12	2.5	Female Plug 9.28.313mm
174968	12	2.5	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
174972	12	2.5	RP34L-5PA-3SC(71)
175166	12	2.5	Female Barrel Right Angle, 5.52.111mm with internal Spring Clip and Locking Notch or Equal
177133	12	2.5	Socket for interchangeable o/p connectors
177874	12	2.5	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
178091	12	2.5	6.4*4.0mm
178283	12	2.5	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
195101	12	2.5	Female Barrel 5.53.39.5mm w/1.0 mm Pin or Equal
196445	12	2.5	Female Barrel 5.53.39.5mm w/1.0 mm Pin or Equal
179410	12	2.5	"Z" series Universal Connector Jack with retention lock; Connector is not included and must be ordered separately. see Listing: http://en.globtek.com/z00-socket-configs.php
180284	12	2.5	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
181578	12	2.5	Female Barrel 3.51.359.5mm, without Locking Notch nor Spring Clip or Equal
181916	12	2.5	Female Barrel 3.51.359.5mm, without Locking Notch nor Spring Clip or Equal
182530	12	2.5	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
183041	12	2.5	Cable Socket, 3-pole, Female, Binder P/N 99 3400 00 03 or equivalent
184192	12	2.5	Female Barrel 5.52.111mm WITH internal Spring Clip and Locking Notch or Equal
184284	12	2.5	Cable Socket, 3-pole, Female, Binder P/N 99 3400 00 03 or equivalent
186698	12	2.5	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
187166	12	2.5	Housing: JST XHP-2, Contacts: JST SXH-001T-P0.6, No Equivalent
215114	12	2.5	Stripped 30 +/-5mm; Tinned 9 +/- 2mm or Equal
199548	12	2.5	Female Barrel 5.52.59.5mm, Right Angle without internal Spring Clip & Locking Notch or Equal
214615	12	2.5	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
227728	12	2.5	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
249602	12	2.5	Female Barrel Right Angle, 5.52.111mm with NO internal Spring Clip NOR Locking Notch or Equal
262489	12	2.5	Waterproof IP68 Molded Female Plug, 2 sockets, 3.0mm Pitch, Equivalent to KCC sk2/2
264255	12	2.5	Female Barrel 5.52.510.0mm, Right Angle with internal Spring Clip & Locking Notch or Equal
264564	12	2.5	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
323902	12	2.5	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
376014	12	2.5	Female Barrel, Right Angle 3.5 * 1.35 * 10 mm No internal Spring Clip nor Locking Notch or Equal
186335	13	1.3	Female Barrel 5.52.59.5mm, Right Angle with internal Spring Clip & Locking Notch or Equal
186484	13	1.3	Female Barrel 5.52.511mm, Right Angle with Spring Clip & Locking Notch or Equal
198358	13	1.3	Female Barrel 5.52.511mm, Right Angle with Spring Clip & Locking Notch or Equal
233160	13	1.3	Stripped 31 +/- 2mm; Tinned 6 +/- 2mm or Equal
177169	13.8	2.17	Female Barrel 5.52.511mm, Right Angle without internal Spring Clip & Locking Notch or Equal
181718	15	2	Female Barrel 5.5 * 2.5 * 10mm with internal Spring Clip and Locking Notch or Equal
177137	15	2	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
218079	15	2	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
163430	15	2	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
176968	15	2	Female Barrel 5.5 * 2.5 * 11mm with no internal Spring Clip and Locking Notch or Equal
226284	15	2	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
224080	15	2	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
190938	15	2	5-Pin Circular Connector, Binder P/N 99-9114-00-05 NO EQUIVALENT!
199279	16	1.5	Female Barrel 5.52.111mm w/ Spring Clip & Locking Notch or Equal
191665	18	1.66	Female Barrel 6.5 x 4.4 x 1.37 x 14mm Straight or Equal
179508	18	1.667	Female Barrel 5.52.512mm, Right Angle No internal Spring Clip nor Locking Notch or Equal
214869	19	1.57	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
146540	24	1.25	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
271887	24	1.25	30 ±2mm Strip, 4 ± 1mm Tin or Equal
171016	24	1.25	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
171021	24	1.25	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
171327	24	1.25	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
175125	24	1.25	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
175880	24	1.25	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
179411	24	1.25	"Z" series Universal Connector Jack with retention lock; Connector is not included and must be ordered separately. see Listing: http://en.globtek.com/z00-socket-configs.php
180451	24	1.25	Female Barrel 5.52.111mm No internal Spring Clip nor Locking Notch or Equal
186473	24	1.25	Female Barrel Right Angle, 5.52.111mm with NO internal Spring Clip NOR Locking Notch or Equal
199721	24	1.25	2 Pin FX9
224892	24	1.25	Stripped 20+/-2mm, Tinned 5+/-2mm with Black Thermal Contracting Sleeve or Equal
169726	24	1.25	Female Barrel 5.5 * 2.5 * 13.8mm w/ 6.5mm Thumb Screw or Equal
261621	24	1.25	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
252817	27	1	Female Barrel 5.52.19.5mm No internal Spring Clip nor Locking Notch or Equal
163258	30	1	Female Barrel 5.52.19.5mm No internal Spring Clip nor Locking Notch or Equal
182030	30	1	Female Barrel 5.52.19.5mm No internal Spring Clip nor Locking Notch or Equal
166975	30	1	Female Barrel 5.52.19.5mm No internal Spring Clip nor Locking Notch or Equal
180377	44.5	0.67	Female Barrel 5.52.512mm No internal Spring Clip nor Locking Notch or Equal
180898	48	0.625	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
197714	48	0.625	2 x RJ-45 Jacks mounted in 94V-0 enclosure per IEEE 802.3af configuration
127992	5	4	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
146536	5	4	Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
146537	5	4	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
164674	5	4.0	Female Barrel 3.51.359.5mm, Locking with Spring-loaded or Equal
167230	5	4	Female Barrel 5.52.112mm No internal Spring Clip nor Locking Notch or Equal
168129	5	4	Female Barrel 5.52.511mm, Right Angle w/ Spring Clip & Locking Notch or Equal
168139	5	4	Female Barrel Right Angle, 5.52.111mm with internal Spring Clip and Locking Notch or Equal
168158	5	4	Female Barrel Right Angle 4.01.79.5mm No internal Spring Clip nor Locking Notch or Equal
168209	5	2	USB type B or Equal
267267	5	4	Female Barrel 5.52.111mm WITH internal Spring Clip and Locking Notch or Equal
192053	5	4	AMP Mini Universal Mate-n-Lock, 794188-1, or equal with AMP socket 794223-1 (Qty 4) or equal
178412	5	4	Female Barrel Right Angle, 5.52.111mm with internal Spring Clip and Locking Notch or Equal
179409	5	3	"Z" series Universal Connector Jack with retention lock; Connector is not included and must be ordered separately. see Listing: http://en.globtek.com/z00-socket-configs.php
179553	5	4.0	Female Barrel 3.51.359.5mm, Locking with Spring-loaded or Equal
214305	5	4	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
257963	5	4.0	Female Barrel Right Angle, 5.52.111mm with NO internal Spring Clip NOR Locking Notch or Equal
262477	5	4.0	Micro-B USB 5 Pin Type "B" or Equal
181180	6	1	Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
189413	6	1.5	Female Barrel Right Angle, 5.52.112mm No internal Spring Clip nor Locking Notch or Equal
135816	7.5	3.0	Female Barrel 5.52.59.5mm No internal Spring Clip nor Locking Notch or Equal
191636	9	2.8	Female Barrel 5.52.59.5mm No internal Spring Clip nor Locking Notch or Equal
178411	9	2.77	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
181181	9	1	Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
199942	9	2.8	Female Barrel 5.52.59.5mm No internal Spring Clip nor Locking Notch or Equal
199943	9	2.8	RJ11 Plug, 6 Pin or Equal
180094	9.0	2.77	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
196029	9.0	3.3	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
196499	9.1	3.3	Female Barrel 5.52.511mm, Right Angle with Spring Clip & Locking Notch or Equal
178207	9.1	3.3	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
192057	9.1	3.3	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
186445	9.1	3.3	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
180746	9.1	3.3	Female Barrel 5.52.511mm, Right Angle with Spring Clip & Locking Notch or Equal
201192	9.3	3.2	Female Barrel 5.52.114mm No internal Spring Clip nor Locking Notch or Equal
168181	9.6	2.6	Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
180898	48	0.625	Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal

News Releases

Title	Web Link
CB Certificate IEC 60335-1:2010 (5th ed.) CB report IEC 60335-1:2010 (5th Ed.) and EN 60335- 1:2012.

GTM91120-30VV-T2 Datasheet

Request Info