Request Information Download PDF Configure Output Connector
GTM41060-WWVV-Q GTM41060-WWVV-Q
Information
Model NumberGTM41060-WWVV-Q
DescriptionGTM41060-WWVV-Q, Medical Power Supply, 60601-1-4th Ed. , Wall Plug-in, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Blade Options for Q Series Wall Plug-in Power Supplies, Output Rating: 25 Watts, 3-30V in 0.1V increments, Approvals: cUR CE WEEE VCCI NrCAN GOST-R PSE Ukraine RoHS 2 Double Insulation FCC Level IV 1meter 115 China RoHS C-Tick Israel SIQ CB IP52 CE 2MOPP CCC
Agency Documentshttp://www.globtek.info/certs/GTM41060/
CE EC-Declaration for Medicalhttp://globtek.force.com/models/ec_declaration?id=a0O30000007P7ZHEA0
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
RoHS/RoHS3 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O30000007P7ZHEA0
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC Power Supply AC Adaptor
CategoryMedical Power Supply
Input Voltage Range (V)100-240V~, 50-60 Hz
Max Input Current (A)0.6 A
Max Output Power Rating (W)25
Output Voltage Range (V)3-30
EfficiencyMeets/Exceeds for Medical
Ingress ProtectionIP52, IP54 Option available
Size (mm)84*56*38
Enclosure
User-added image
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTM41060-0903 339 RFQ
GTM41060-1505 5315 RFQ
GTM41060-1605-0.5 5.52.915.95 RFQ
GTM41060-1706 62.816.8 RFQ
GTM41060-1807 72.5717.99 RFQ
GTM41060-1809-1.5 7.52.418 RFQ
GTM41060-1809 9218 RFQ
GTM41060-2412 12224 RFQ
GTM41060-2512 122.0824.96 RFQ
GTM41060-2515-1.2 13.81.824.84 RFQ
GTM41060-2515 151.6624.9 RFQ
GTM41060-2518-2.0 161.524 RFQ
GTM41060-2518 181.3824.84 RFQ
GTM41060-2520 201.2525 RFQ
GTM41060-2524-2.0 221.1324.86 RFQ
GTM41060-2524 241.0424.96 RFQ
GTM41060-2530 300.8324.9 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% of nominal output voltage
04. Line Voltage Regulation: +/- 1% maximum at full load
05. Output Ripple (Vp-p): 1% or 50 mV whichever is greater measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of output connector at nominal line
06. Turn-On/Turn-Off Overshoot: 5% maximum, 500uS maximum recovery time for 25% to 50% step load
07. Turn-On Delay: 3000mSEC maximum at full load, 115VAC
08. Hold-Up Time: 10mS minimum at nominal input and full load
09. Inrush Current: 30A maximum at cold start 120VAC and 60A maximum cold start at 230 VAC
10. Switching Frequency: 66.5 KHz typical
11. Current Limited Option: Models numbers containing CC are "Current Limited" to rated output current with a tolerance of +/-10%

B) PROTECTION
1. Over-Voltage: Protected, unit will recover upon removal of fault
2. Over-Load: Protected, unit will recover upon removal of fault
3. Short Circuit: Protected, unit will recover upon removal of fault
4. Input Protection: Input line fusing

C) SAFETY
1. Dielectric Withstand Voltage: 5656Vdc from primary to secondary
2. Earth Leakage Current: N/A for Class II units, there is no PE Ground pin, so Earth Leakage current is not measured
3. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition)
4. Means of Protection: 2 x MOPP

D) OTHER:
1. MTBF: 200,000 hours @ 25°C ambient temperature
2. Operating Temperature: 0°C to 40°C ambient temperature
Optional Operating Temperature: -5°C to 40°C ambient temperature (RFP4385)
3. Humidity: 0% to 90% relative humidity
4. Storage Temperature: -40°C to 80°C
5. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

E) ENCLOSURE
1. Upper Housing: High impact plastic, 94V0 polycarbonate, non-vented
2. Lower Housing: High impact plastic, 94V0 polycarbonate, non-vented
3. Size: 84.0* 56.0*37.9 mm +/-1.0
4. Green (Blue Optional) LED indicator for power "Power On"
Derating CurveUser-added image

 
Qty (ea.)/Carton40
Individual Box/Gift Box Size (mm)114*69.5*58.4
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)463 x 355 x 122
Gross Weight (kg)10.8
Label Width (mm)45.8
Label Height (mm)40.8
Input Configuration
DescriptionBlade Options for Q Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video




blades
User-added imageUser-added image
11                           12

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/ South Africa SANS 164-3/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II; IN P/N: Q-IN(R)
09. IEC320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II; BR P/N: Q-BR(R)
 

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector





YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
2MOPP2 x MOPP (Means of Patient Protection) marked with 2MOPP near model name
User-added image60601-1 3rd Operating Instructions
User-added image
C-TICK to 55022, C-TICK tested to comply with AUSTRALIA section 182 of The Radio Communication Act Of 1992
No Logo ApplicableCB report IEC 60601-1: 2005 + CORR. 1 (2006) + CORR. 2 (2007) and or EN 60601-1:2006 3rd Edition including 2MOOP requirements
User-added imageCCC to GB4943.1-2011 GB9254-2008 GB17625.1-2012, Tropical <2000
User-added image  CE Certification CE Mark: tested to comply with EN 55032.2012+AC.2013 EN 61000-3-2.2014 EN 61000-3-3.2013 EN 60601-1-2.2015 EN 55024.2010
User-added image  CE Mark: tested to comply with EN61000-3-2, EN61000-3-3 and EN50082-1, including EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61001-1-2-2007 EMI: Complies with EN55011 CLASS B and FCC Part 15 B
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image
 
ANSI/AAMI ES60601-1: A1:2012, C1:2009/(R)2012 and A2:2010/(R)2012, CSA CAN/CSA-C22.2 NO. 60601-1:14
No LogoDesigned to meet EN 60950-1 :2006+Am 1:2010+Am 11 :2009+Am 12:2011+A2:2013
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added image
FCC PART 15 CLASS B
User-added image
 
GOST-R mark for Russia(Document: http://www.globtek.com/html/iso_certificates/GT_GOST-R.pdf). 03/15/2015. Due to lack of demand, GlobTek will not be renewing it's GOST certification. Please contact your sales engineer for pricing on EAC.
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
IP52Ingress Protection: IP52 to IEC60529:2001 Protected against dust - limited ingress (no harmful deposit) and Protected against direct sprays up to 15 degrees from the vertical
User-added image

Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS Of Israel Standard SI 60061 Part 1 – Medical equipment: General requirements for basic safety and essential performance, Mar. 2008. (5 Volts Only)
 User-added image Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe) exception 5.1~6.9V require 1000 mm output cable
User-added imageEEV1191Natural Resources Canada (NRCan): CSA Standard C381.1-08, QSP NRCAN EEV1191; http://shop.csa.ca/en/canada/energy-efficiency/cancsa-c3811-08/invt/27024802008
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHSSpecifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
User-added image
 
IEC 60601-1:2005 (Third Edition) + CORR. 1:2006 + CORR. 2:2007 + A1:2012 (or IEC 60601-1: 2012 reprint)
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
168349102.08Female Barrel Right Angle, 5.5*2.1*12mm with internal Spring Clip and Locking Notch or Equal
137663122.08Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
137666122.08Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
117823122.08Female Barrel Right Angle, 5.5*2.1*9.5mm without internal Spring Clip nor Locking Notch or Equal
176527122.08Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
222459122.08Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
229506122.08Female Barrel Right Angle, 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or Equal
228619122.08Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
227338122.08Female Barrel Right Angle, 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
226283122.08Female Barrel Right Angle, 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
201181122.08Female Barrel straight 3.5*1.3*9.5mm, without Locking Notch nor Spring Clip or Equal
209633122.08Female Barrel Right Angle, 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or Equal
189325122.08Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
186557122.08Female Barrel Right Angle, 5.5*2.0*19.5 mm with Internal Spring Clip and Locking Notch or Equal
184797122.08Female Barrel 5.5*2.5*14mm No internal Spring Clip nor Locking Notch or Equal
184378122.08Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
183339122.08Female Barrel 5.5*2.5*14mm No internal Spring Clip nor Locking Notch or Equal
183019122.08Female Barrel 5.5*2.0*18mm without Spring Clip & Locking Notch or Equal
182769122.08Female Barrel Right Angle, 5.5*2.1*14mm No internal Spring Clip nor Locking Notch or Equal
182506122.08Right Angle Female Barrel 6.5 x 4.4 x 9.5mm w/1.37 mm Pin or Equal
149036122.08Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
149048122.08Power connector 5.5x2.5x13.8mm with 6.5mm thumb screw
161815122.08Female Barrel Right Angle, 5.5*2.1*9.5mm without internal Spring Clip nor Locking Notch or Equal
165881121.25Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
167242122.08Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
167741122.08Stripped 25 +/- 5mm; Tinned 6 +/- 2mm or Equal
168624122.08Female Barrel 5.5*3.3*9.5mm w/1.0 mm Pin or Equal
168714122.08Female Barrel Right Angle, 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or Equal
168784122.08Female Barrel 5.5*2.5*9.5mm, Right Angle No internal Spring Clip nor Locking Notch or Equal
168785122.08Female Barrel Right Angle, 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or Equal
168786122.08Female Barrel Right Angle, 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
169829122.08Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
171288121.0Stripped 25+/-5mm, Tinned 8+/-2mm with Black Thermal Contracting Sleeve length 10 +3/-1mm or Equal
171313121.0 (CC)Stripped 25+/-5mm, Tinned 8+/-2mm with Black Thermal Contracting Sleeve length 10 +3/-1mm or Equal
174949122.08Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
344955122.08Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
178210122.08Female Barrel 5.5*2.5*11mm, Right Angle without internal Spring Clip & Locking Notch or Equal
199011122.08Female Barrel Right Angle, 5.5*2.1*9.5mm No internal Spring Clip nor Locking Notch or Equal
178619122.08Female Barrel 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
179500122.08Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
179640122.08Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
179783122.08"Z" series Universal Connector Jack with retention lock; Connector is not included and must be ordered separately. see Listing: http://en.globtek.com/z00-socket-configs.php
22629412.02.0Female Barrel Right Angle, 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
14916513.81.8Stripped 25+/-5mm, Tinned 8+/-2mm with Black Thermal Contracting Sleeve length 10 +3/-1mm or Equal
176824141.78Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
183438151.67Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
184283151.67Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
137690151.67Female Barrel 3.5*1.35*11mm, with Locking Notch and Spring Clip or Equal
175679151.67Female Barrel 5.5*2.1*12.5mm w/Spring Clip and Locking Notch or Equal
183371151.67Female Barrel 5.5*2.1*11mm WITH internal Spring Clip and Locking Notch or Equal
164687151.67Female Barrel Right Angle, 5.5*2.1*11mm with NO internal Spring Clip NOR Locking Notch or Equal
144014161.5Binder P/N 09-9748-00-03 with overmold and strain relief or Equal
149480181.4Female Barrel Right Angle, 5.5*2.1*11mm with internal Spring Clip and Locking Notch or Equal
117927181.40Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
176967181.4Female Barrel 5.5*2.5*12mm, Right Angle No internal Spring Clip nor Locking Notch or Equal
137705181.4Female Barrel 5.5*2.1*12mm No internal Spring Clip nor Locking Notch or Equal
171009181.4Female Barrel 5.5*2.5*9.5mm, Right Angle No internal Spring Clip nor Locking Notch or Equal
214868191.31Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
161870201.25Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
199769201.25Female Barrel 5.5 * 2.5 * 9mm No internal Spring Clip nor Locking Notch or Equal
166355201.25Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
190802221.13Female 2-Pin Connector No Equivalent
344642241.04Stripped 50 +/-5mm; Tinned 9.5 +/- 2mm or Equal
175242241.04Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
177431241.04Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
181907241.04Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
237286241.04Stripped 25 +/- 5mm; Tinned 6 +/- 2mm or Equal
166262241.04Socket for interchangeable o/p connectors
165870241.04RJ45,8P8C or Equal
137711241.04Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
117946241.04Stripped 25+/-5mm, Tinned 8+/-2mm with Black Thermal Contracting Sleeve length 10 +3/-1mm or Equal
169401241.04Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
1683573.73.24Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
10248553Female Barrel 3.5*1.1*9mm, Spring loaded with Locking groove
10789153Female Barrel Right Angle, 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
12769753Switchcraft 761KS12 connector, 5.5x2.5x12mm with thumb screw, sealed, no substitute
13756953Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
13757453Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
13757553Female Barrel 5.5*2.5*11mm, Right Angle with Spring Clip & Locking Notch or Equal
14408853Female Barrel Right Angle, 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
14408953Female Barrel Right Angle, 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
15399253Female Barrel with Center Pin 6.5 x 4.4 x 9.5mm ( OD x ID x L) with 1.37mm center pin
16416453Female Barrel straight 3.5*1.3*9.5mm, without Locking Notch nor Spring Clip or Equal
16416553.0Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
16435351.5Female Barrel Straight 4.0*1.7*6.73mm +/-0.3mm with internal Spring Clip and Locking Notch or Equal
16576351.5CUSTOM 4 PIN MINI-USB NINGBO XINYA UNITED TECH.CO., SERIES 172 ASSEMBLED TYPE
16718353PCB Pins 4.5mm L x 1.5mm Dia
16724353Female Barrel 3.5*1.3*9.5 mm, with Locking Notch and Spring Clip or Equal
16883653Female Barrel 3.2*0.9*8.5mm without Locking Notch and spring Loaded
16983353Stripped 25+/-5mm, Tinned 8+/-2mm with Black Thermal Contracting Sleeve length 10 +3/-1mm or Equal
17116653Female Barrel 3.5*1.35*9.5mm, with Locking Notch and Spring Clip or Equal
17116753Female Barrel 1.1*3.5*9mm, Spring Load Locking Notch, Insert Pin#3511TV200(01) No Substitute
19862053Female Barrel Right Angle, 5.5*2.1*9.5mm without internal Spring Clip nor Locking Notch or Equal
17928453Female Barrel 5.5*2.5*11mm, Right Angle with Spring Clip & Locking Notch or Equal
18074753Female Barrel, Locking, 5.5 * 2.5 * 13.8mm w/ 4.0mm Thumb Screw or Equal
18117753Stripped 25.4 +/-1mm, Tinned 6+/-1mm
20459653Female Barrel Right Angle, 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
21052153Female Barrel 5.5*2.5*14mm No internal Spring Clip nor Locking Notch or Equal
21382653Female Barrel 5.5*2.5*14mm No internal Spring Clip nor Locking Notch or Equal
22541753Female Barrel 3.5*1.35*9.5mm, without Locking Notch nor Spring Clip or Equal
24960753DC Power plug, 3 conductor, 3.5 X 1.1 X 7.6mm Rated 16Vdc @ 3A
18726962.83Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
10095462.5Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
10090462.8Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
18416162.5Female Barrel 5.5 * 2.1 * 13.8 mm w/ 4 mm Thumb Screw or Equal
17102062.8Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
18250062.5Female Barrel 5.5*2.5*9.5mm with internal Spring Clip and Locking Notch or Equal
16320562.8Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
11760162.5Female Barrel Right Angle, 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
10140262.5Female Barrel 5.5*2.1*11mm No internal Spring Clip nor Locking Notch or Equal
18273962.83Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
23267672.57Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
17696982.25Female Barrel 3.5*1.35*6.5mm, Custom overmold
17547982.25Female Barrel 3.5*1.35*6.5mm, Custom overmold
18598192Female Barrel 5.5*2.5*14mm No internal Spring Clip nor Locking Notch or Equal
18424592Mini-B USB 5 Pin Type "B" or Equal
19272692Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
16863292.0Female Barrel, Right Angle 3.5*1.1*9.5 mm No internal Spring Clip nor Locking Notch or Equal
13762192Stripped 25.4 +/-1mm, Tinned 6+/-1mm
12772192.0Female Barrel 5.5*2.5*9.5mm No internal Spring Clip nor Locking Notch or Equal
12772092Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
12424392.0Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
11771992Female Barrel 5.5*2.5*11mm, Right Angle without internal Spring Clip & Locking Notch or Equal
11771592Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
31786092Female Barrel 5.5*2.5*9.5mm, Right Angle with internal Spring Clip & Locking Notch or Equal
51515792.0Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
10069292Female Barrel 5.5 * 2.5 * 11mm No internal Spring Clip nor Locking Notch or Equal
1931979.12.74Female Barrel 5.5*2.5*9.5mm No internal Spring Clip nor Locking Notch or Equal
16883653Female Barrel 3.2*0.9*8.5mm without Locking Notch and spring Loaded
16883653Female Barrel 3.2*0.9*8.5mm without Locking Notch and spring Loaded
16883653Female Barrel 3.2*0.9*8.5mm without Locking Notch and spring Loaded
16883653Female Barrel 3.2*0.9*8.5mm without Locking Notch and spring Loaded
16883653Female Barrel 3.2*0.9*8.5mm without Locking Notch and spring Loaded
16883653Female Barrel 3.2*0.9*8.5mm without Locking Notch and spring Loaded
News Releases
TitleWeb Link
Wall Plug In LPS Power Supply in Class II double insulated 15W (Watt) Interchangeable blade wall plug in mechanical configuration updated to latest Israel standard SI 60950 Part 1, model GT-41060-1505 Serieshttp://en.globtek.com/news.php/wall-plug-in-lps-power-supply-in-class-ii-double-insulated-15w-watt-interchangeable-blade-wall-plug-in-mechanical-configuration-updated-to-latest-israel-standard-si-60950-part-1-model-gt-41060-1505-series
UL Certificate GTM41060(CC)-FW 3rd Edition w-RM ANSI-AAMI ES60601-1 and CAN-CSA-C22.2 No. 60601-1.pdf UL Report GTM41060(CC)-FW 3rd Edition w-RM ANSI-AAMI ES60601-1 (2005 + C1_09 + A2_10) CAN-CSA-C22.2 No. 60601-1 (2008).pdf

Request Info

Text us your inquiry