GTM961005P-100PD-USBCP–T2 |
---|
| GTM961005P-100PD-USBCP–T2, USB Adaptive Power Source ICT/ITE/Medical Power supply, Desktop/External, USB Adaptive Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60Hz, IEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka "Figure-8"), Output Rating: 100 Watts, Power rating with convection cooling (W) , 3.3-21V in 0.1V increments, Approvals: cMETus 62368; CE; China RoHS; Morocco; EAC; Ukraine; WEEE; VCCI; RoHS; Level VI; PSE; UKCA; Double Insulation; CB 60335; CB 61158; |
---|
Information |
---|
Model Number | GTM961005P-100PD-USBCP–T2 |
---|
Agency Documents | http://www.globtek.info/certs/GTM961005P/ |
---|
CE EC-Declaration for Medical | Contact GlobTek for more information |
---|
CE EC-Declaration for Industrial/Commercial/ITE | https://cs.globtek.info/ec_declaration?id=a0O3a00000NHUPLEA5 |
---|
CE EC-Declaration for Household | Contact GlobTek for more information |
---|
UKCA-Declaration for Medical | Contact GlobTek for more information |
---|
UKCA-Declaration for Industrial/Commercial/ITE | https://cs.globtek.info/ukca_declaration?id=a0O3a00000NHUPLEA5 |
---|
UKCA-Declaration for Household | Contact GlobTek for more information |
---|
Morocco SDoC Declaration | https://cs.globtek.info/Morocco_SDoC_Declaration?id=a0O3a00000NHUPLEA5 |
---|
RoHS/RoHS3 Declaration | https://www.globtek.com/pdf/rohs_cert/a0O3a00000NHUPLEA5 |
---|
Prop 65 Statement | https://www.globtek.com/r2/PH7CNf |
---|
REACH Declaration | https://www.globtek.com/r2/eM2co8 |
---|
Conflict Minerals Declaration | https://www.globtek.com/r2/vZY8R5 |
---|
Model Parameters |
---|
Type | Desktop/External |
---|
Technology | USB Adaptive Power Supply AC Adaptor |
---|
Category | USB Adaptive Power Source ICT/ITE/Medical Power supply |
---|
Input Voltage Range (V) | 100-240V~, 50-60Hz |
---|
Max Input Current (A) | 1.5A |
---|
Max Output Power Rating (W) | 100 |
---|
Output Voltage Range (V) | 3.3-21 |
---|
Efficiency | USA DOE Level VI / Eco-design Directive 2009/125/EC, (EU) 2019/1782 |
---|
Ingress Protection | IP41 |
---|
Size (mm) | 149.3 x 62.8 x 34.0 +/-1.0 |
---|
Enclosure | |
---|
3D File Download | https://www.globtek.com/dl/GTM96900-GTM961200-T3.igs |
---|
Rating Table |
---|
Model Number (Final ordering #/Part No to be defined) | Output Number | Voltage | Amps (Convection) | Amps (Forced Air) | Watts (Convection) | Watts (Forced Air) | RFQ |
---|
* (Final ordering #/Part No to be defined) |
Specifications |
---|
USB Power Delivery CapabilitiesProtocol supported: | USB Power Delivery (PD) 2.0/3.0 + PPS |
---|
Advertised Power Data Objects (PDOs): | 5V, 9V, 12V, 15V, 15.1V, 20V, PPS (3.3 - 21V) |
---|
Note 1: | Custom fixed PDOs available upon request. PDO1 must be 5V. PDO2 through PDO7 may be set to any custom voltage from 3.3V to 21V, with a step size of 100mV. |
---|
Note 2: | In critical applications, the use of a non-authorized USB PD power adapter may pose a risk. The power adapter's identity may be checked and validated prior to PD contract negotiation by using USB PD Vendor Defined Messages (VDMs). Please see our article Product Security and Risk Mitigation for USB Power Delivery (PD) Based Systems for additional information. |
---|
InputInput Voltage: | 85-264VAC, Nameplate: 100-240VAC |
---|
Input Frequency: | 47-63Hz, Nameplate: 50-60Hz |
---|
No Load Input Power: | < 150mW @ 230VAC (EU CoC Tier 2 compliant) |
---|
Inrush Current: | 60A @ 115VAC, 120A @ 230VAC typ. (at peak of AC line, cold start) |
---|
Efficiency: | DoE Efficiency Level VI and CoC Tier 2 compliant (tested according to DoE 10 CFR Part 430, Subpart B, Appendix Z) |
---|
OutputTurn-on Delay: | < 1 second @ 115VAC and full load |
---|
Output Regulation: | ± 4% max. (measured at the end of a 1m long output cord) |
---|
Line Regulation: | ± 0.5% typ. (measured at the end of a 1m long output cord) |
---|
Ripple: | 75mV max. (0 - 100% load, using a 47µF low-ESR electrolytic cap + 0.1µF ceramic cap, measured @ 20MHz BW, at the output connector) |
---|
Transient Response: | 5% ΔV max. ; 1ms recovery time max. (for 25% - 75% step, Vout > 9V) 10% ΔV max. ; 1ms recovery time max. (for 25% - 75% step, Vout ≤ 9V) |
---|
Hold-up Time: | 20ms typ. (100VAC, 100% load) 25ms min. (100VAC , 75% load) |
---|
Power Indicator: | Green LED |
---|
Recommended Output Cable (-USBCJ only): | For compliance with international efficiency regulations, use GlobTek USB Type-C output cables with low-voltage drop construction:
Black (1m): USBCE5APL1M0USBCB(R) Black (2m): USBCE5APL2M0USBCB(R) White (1m): USBCE5APL1M0USBCW(R) White (2m): USBCE5APL2M0USBCW(R) |
---|
ProtectionsInput Protection: | MOV transient suppressor, input line fusing |
---|
Over-Voltage Protection: | Level 1: 110-130%, Auto-recovery, adaptive to selected PDO Level 2: 24-28V, Latched off, cycle AC to reset |
---|
Over-Current Protection: | 110-130%, Auto-recovery, adaptive to selected PDO |
---|
Short-Circuit Protection: | Auto-recovery |
---|
Over-Temperature Protection: | Level 1: Auto-recovery, temperature readable via USB PD 3.0 Extended Messages Level 2: Latched off, cycle AC to reset |
---|
EnvironmentalMTBF: | 1,500,000 hours @ 25°C ambient, full load (Telcordia SR-332, Issue 3) |
---|
Operating Temperature: | -10°C to 40°C (full load) |
---|
Storage Temperature: | -40°C to 80°C |
---|
Humidity: | 0% to 95% relative humidity, non-condensing |
---|
Altitude | 5000m |
---|
Cooling: | Convection |
---|
RoHS: | Complies with EU 2011/65/EU and China SJ/T 11363-2006 |
---|
SafetyCertifications: | IEC60601-1 IEC60601-1-11 IEC62368-1 IEC61558-2-16 IEC60335-1 |
---|
Input Configuration Options: | -T2 suffix: Two-conductor input, floating output (F1)
-T3 suffix: Three-conductor input Floating output with functional earth (F2) ~or~ Earthed output (E1)
See "Input Configuration" within the product specification for details. |
---|
Dielectric Withstand Voltage: | 4000VAC, primary-to-secondary 1500VAC, primary-to-earth (three-conductor input models only) 1500VAC, secondary-to-earth (F2 configuration only) |
---|
Means of Protection: | 2 x MOPP, primary-to-secondary 1 x MOPP, primary-to-earth (three-conductor input models only) 1 x MOPP, secondary-to-earth (F2 configuration only) |
---|
Output Leakage Current: | Two-conductor input, floating output (F1) NC: 100µA max. SFC: 150µA max.
Three-conductor input, floating output with functional earth (F2) NC: 10µA max. SFC: 100µA max.
Three-conductor input, earthed output (E1) NC: 5µA max. SFC: 100µA max. |
---|
Earth Leakage Current: | 300µA max. NC & SFC (N/A for 2-conductor input models) |
---|
Note 3: | Review input configuration with our article: PSU Isolation and Identify |
---|
EMCCertifications: | IEC60601-1-2 EN55032 EN55024 |
---|
Conducted Emissions: | EN55032, Class B (with resistive load) |
---|
Radiated Emissions: | EN55032, Class B (with resistive load) |
---|
Harmonic Current Voltage Distortion: | IEC61000-3-2, Class A |
---|
Voltage Fluctuations/Flicker: | IEC61000-3-3 |
---|
Electrostatic Discharge (ESD) Immunity: | IEC61000-4-2, 10KV contact discharge, 18KV air discharge, Criterion A |
---|
Radiated RF Immunity: | IEC61000-4-3, 10V/m @ 80-1000MHz, 3V/m @ 1-2.7GHz, 80% 1KHz AM, Criterion A |
---|
EFT/Burst Immunity: | IEC61000-4-4, 4KV/100KHz., Criterion A |
---|
Line Surge Immunity: | IEC61000-4-5, 2KV differential, 4KV common-mode, Criterion A |
---|
Conducted RF Immunity: | IEC61000-4-6, 10VRMS, 80% 1KHz AM, Criterion A |
---|
Voltage Dip Immunity: | IEC61000-4-11, Criterion B/C |
---|
EnclosureHousing: | High impact plastic, 94V0 polycarbonate, non-vented |
---|
Markings: | Adhesive backed label or laser engraving |
---|
Prevention of Unauthorized UseUSB Power Delivery: | In critical applications, the use of a non-authorized USB PD power adapter may pose a risk.
The power adapter's identity may be checked and validated prior to PD contract negotiation by use of USB PD Vendor Defined Messages (VDMs). The power adapter will respond to a USB PD “Discover Identity” VDM with 0x4754 in the “ProductID” field.
Additionally, a non-standard 15.1V PDO is included. Host systems may be designed to reject a power adapter which does not contain a 15.1V PDO. |
---|
Note 4: | These measures do not ensure a secure implementation, and are only suggested as a method of risk mitigation. |
---|
Note 5: | Please see our article Product Security and Risk Mitigation for USB Power Delivery (PD) Based Systems for additional information. |
---|
Special OptionsNon-standard - Contact GlobTek - Custom housing and output cord colors
- Custom fixed output cord length (1m, 2m, 3m lengths)
- Custom markings and marking methods
- Custom USB PD PDOs: Output voltages selectable between 3.3V and 21V, in 100mV increments
|
Derating Curve | |
---|
Qty (ea.)/Carton | 20 |
---|
Individual Box/Gift Box Size (mm) | Egg Crate |
---|
Individual Box/Gift Box Color | |
---|
Master Carton Size (mm) | 427 x 405 x 158 |
---|
Gross Weight (kg) | 15.6 |
---|
Label Width (mm) | 50.0 |
---|
Label Height (mm) | 110.0 |
---|
Input Configuration |
---|
Description | IEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka "Figure-8") Mates with IEC 60320/C7 Plug
Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Please contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.
Standard International IEC 320/C7 Cordsets |
|
---|
Output Configuration |
---|
Common output connector options: Click to add to your request.
|
|
|
|
|
| L Type (Coaxial 5.5x2.5mm plug) | C Type (Coaxial 5.5x2.1mm plug) | K Type (Coaxial 3.5x1.3mm plug) | LL Type (5.5x2.5mm Locking 760k type) | CL Type (5.5x2.1mm Locking S761k type) | Magnetic Connector |
|
|
|
|
|
| YL3 Type (KPPX-3P) | YL4 Type (KPPX-4P) | EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) | MSB Type (Micro USB) | USBC Type (USB Type C) | Inquire for custom design |
Comprehensive list of GlobTek output cordset options Contact GlobTek for your specific requirements or custom solutions. |
Approvals |
---|
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice. Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation. |
Logo | Description |
---|
| Morocco SDoC declaration http://www.globtek.info/certs/Morocco%20SDoC%20Declaration/ | RoHS | Specifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf | null | Audio/Video, Information And Communication Technology Equipment - Part 1: Safety Requirements [UL 62368-1:2021 Ed.3] Audio/Video, Information And Communication Technology Equipment - Part 1: Safety Requirements [CSA C22.2#62368-1:2021 Ed.3] | | Declaration ДС № ЕАЭС N RU Д-US.КА01.В.10453_19 Custom Union of Russia, Belarus and Kazakhstan http://www.globtek.com/redirect/?loc=gost-certificate-eac-declaration | | Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe) | No Logo Applicable | CB for IEC 60335-1:2010 (Fifth Edition) incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013 | | null | | CE Certification | No Logo Applicable | IEC 61558-1:2005+A1, IEC 61558-2-16:2009+A1 | | Japan: Voluntary Control Council for Interference (VCCI) | | JAPAN TUV R-PSE, Cert. No. JD 50469658, to J62368-1(H30) , J55032(H29),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: https://www.globtek.com/r2/Szj4Vb | | CHINA SJ/T 11364-2014, China RoHS Chart: http://www.globtek.com/pdf/F-GT-DJD-8.4.1-006%20China%20RoHS%20Declaration%205-20-22.pdf | | Ukraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf) | | WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case | | UKCA Certification |
|