GTM961005P-100PD-USBCJ–T2A Desktop/External USB Adaptive Power Source ICT/ITE/Medical Power supply

GTM961005P-100PD-USBCJ–T2A
GTM961005P-100PD-USBCJ–T2A, USB Adaptive Power Source ICT/ITE/Medical Power supply, Desktop/External, USB Adaptive Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60Hz, IEC 60320/C18 AC Inlet connector, Class II, Non-Earth Ground, Output Rating: 100 Watts, Power rating with convection cooling (W) , 3.3-21V in 0.1V increments, Approvals: cMETus 62368; CE; China RoHS; Morocco; Ukraine; EAC; WEEE; VCCI; RoHS; Level VI; PSE; UKCA; Double Insulation; CB 61158; CB 60335;GTM961005P-100PD-USBCJ–T2A, USB Adaptive Power Source ICT/ITE/Medical Power supply, Desktop/External, USB Adaptive Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60Hz, IEC 60320/C18 AC Inlet connector, Class II, Non-Earth Ground, Output Rating: 100 Watts, Power rating with convection cooling (W) , 3.3-21V in 0.1V increments, Approvals: cMETus 62368; CE; China RoHS; Morocco; Ukraine; EAC; WEEE; VCCI; RoHS; Level VI; PSE; UKCA; Double Insulation; CB 61158; CB 60335;
Information
Model NumberGTM961005P-100PD-USBCJ–T2A
Agency Documentshttp://www.globtek.info/certs/GTM961005P/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttps://cs.globtek.info/ec_declaration?id=a0O3a00000NI5XXEA1
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITEhttps://cs.globtek.info/ukca_declaration?id=a0O3a00000NI5XXEA1
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://cs.globtek.info/Morocco_SDoC_Declaration?id=a0O3a00000NI5XXEA1
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0O3a00000NI5XXEA1
Prop 65 Statementhttps://www.globtek.com/r2/PH7CNf
REACH Declarationhttps://www.globtek.com/r2/eM2co8
Conflict Minerals Declarationhttps://www.globtek.com/r2/vZY8R5
Model Parameters
TypeDesktop/External
TechnologyUSB Adaptive Power Supply AC Adaptor
CategoryUSB Adaptive Power Source ICT/ITE/Medical Power supply
Input Voltage Range (V)100-240V~, 50-60Hz
Max Input Current (A)1.5A
Max Output Power Rating (W)100
Output Voltage Range (V)3.3-21
EfficiencyUSA DOE Level VI / Eco-design Directive 2009/125/EC, (EU) 2019/1782
Ingress ProtectionIP41
Size (mm)149.3 x 62.8 x 34.0 +/-1.0
EnclosureUser-added image
3D File Downloadhttps://www.globtek.com/file/dl/GTM961005P-100PD-CUSBCJ-T2A.zip
Rating Table
Model Number (Final ordering #/Part No to be defined)Output Voltage/Current Levels AvailableRFQ
GTM961005P-100PD–USBCJ-T2A*5V/5.0A, 9V/5.0A, 12V/5.0A, 15V/5.0A, 15.1V/5.0A, 20V/5.0A, 3.3V-21V/5.0A
* (Final ordering #/Part No to be defined)
Specifications

USB Power Delivery Capabilities

Protocol supported:USB Power Delivery (PD) 2.0/3.0 + PPS
Advertised Power Data Objects (PDOs):5V, 9V, 12V, 15V, 15.1V, 20V, PPS (3.3 - 21V)
Note 1:Custom fixed PDOs available upon request. PDO1 must be 5V. PDO2 through PDO7 may be set to any custom voltage from 3.3V to 21V, with a step size of 100mV.
Note 2:In critical applications, the use of a non-authorized USB PD power adapter may pose a risk. The power adapter's identity may be checked and validated prior to PD contract negotiation by using USB PD Vendor Defined Messages (VDMs). Please see our article Product Security and Risk Mitigation for USB Power Delivery (PD) Based Systems for additional information.

Input

Input Voltage:85-264VAC, Nameplate: 100-240VAC
Input Frequency:47-63Hz, Nameplate: 50-60Hz
No Load Input Power:< 150mW @ 230VAC (EU CoC Tier 2 compliant)
Inrush Current:60A @ 115VAC, 120A @ 230VAC typ. (at peak of AC line, cold start)
Efficiency:DoE Efficiency Level VI and CoC Tier 2 compliant (tested according to DoE 10 CFR Part 430, Subpart B, Appendix Z)

Output

Turn-on Delay:< 1 second @ 115VAC and full load
Output Regulation:± 4% max. (measured at the end of a 1m long output cord)
Line Regulation:± 0.5% typ. (measured at the end of a 1m long output cord)
Ripple:75mV max. (0 - 100% load, using a 47µF low-ESR electrolytic cap + 0.1µF ceramic cap, measured @ 20MHz BW, at the output connector)
Transient Response:  5% ΔV max. ; 1ms recovery time max. (for 25% - 75% step, Vout > 9V)
10% ΔV max. ; 1ms recovery time max. (for 25% - 75% step, Vout ≤ 9V)
Hold-up Time:20ms typ. (100VAC, 100% load)
25ms min. (100VAC , 75% load)
Power Indicator:Green LED
Recommended Output Cable (-USBCJ only):For compliance with international efficiency regulations, use GlobTek USB Type-C output cables with low-voltage drop construction:

Black (1m): USBCE5APL1M0USBCB(R)
Black (2m): USBCE5APL2M0USBCB(R)
White (1m): USBCE5APL1M0USBCW(R)
White (2m): USBCE5APL2M0USBCW(R)

Protections

Input Protection:MOV transient suppressor, input line fusing
Over-Voltage Protection:Level 1: 110-130%, Auto-recovery, adaptive to selected PDO
Level 2: 24-28V, Latched off, cycle AC to reset
Over-Current Protection:110-130%, Auto-recovery, adaptive to selected PDO
Short-Circuit Protection:Auto-recovery
Over-Temperature Protection:Level 1: Auto-recovery, temperature readable via USB PD 3.0 Extended Messages
Level 2: Latched off, cycle AC to reset

Environmental

MTBF:1,500,000 hours @ 25°C ambient, full load (Telcordia SR-332, Issue 3)
Operating Temperature:-10°C to 40°C (full load)
Storage Temperature:-40°C to 80°C
Humidity:0% to 95% relative humidity, non-condensing
Altitude5000m
Cooling:Convection
RoHS:Complies with EU 2011/65/EU and China SJ/T 11363-2006

Safety

Certifications:IEC60601-1
IEC60601-1-11
IEC62368-1
IEC61558-2-16
IEC60335-1
Input Configuration Options:-T2 suffix: Two-conductor input, floating output (F1)

-T3 suffix: Three-conductor input
                   Floating output with functional earth (F2)
                     ~or~
                   Earthed output (E1)

See "Input Configuration" within the product specification for details.
Dielectric Withstand Voltage:4000VAC, primary-to-secondary
1500VAC, primary-to-earth (three-conductor input models only)
1500VAC, secondary-to-earth (F2 configuration only)
Means of Protection:2 x MOPP, primary-to-secondary
1 x MOPP, primary-to-earth (three-conductor input models only)
1 x MOPP, secondary-to-earth (F2 configuration only)
Output Leakage Current:Two-conductor input, floating output (F1)
NC: 100µA max.
SFC: 150µA max.

Three-conductor input, floating output with functional earth (F2)
NC: 10µA max.
SFC: 100µA max.

Three-conductor input, earthed output (E1)
NC: 5µA max.
SFC: 100µA max.
Earth Leakage Current:300µA max. NC & SFC (N/A for 2-conductor input models)
Note 3:Review input configuration with our article:  PSU Isolation and Identify
 

EMC

Certifications:IEC60601-1-2
EN55032
EN55024
Conducted Emissions:EN55032, Class B (with resistive load)
Radiated Emissions:EN55032, Class B (with resistive load)
Harmonic Current Voltage Distortion:IEC61000-3-2, Class A
Voltage Fluctuations/Flicker:IEC61000-3-3
Electrostatic Discharge (ESD) Immunity:IEC61000-4-2, 10KV contact discharge, 18KV air discharge, Criterion A
Radiated RF Immunity:IEC61000-4-3, 10V/m @ 80-1000MHz, 3V/m @ 1-2.7GHz, 80% 1KHz AM, Criterion A
EFT/Burst Immunity:IEC61000-4-4, 4KV/100KHz., Criterion A
Line Surge Immunity:IEC61000-4-5, 2KV differential, 4KV common-mode, Criterion A
Conducted RF Immunity:IEC61000-4-6, 10VRMS, 80% 1KHz AM, Criterion A
Voltage Dip Immunity:IEC61000-4-11, Criterion B/C

Enclosure

Housing:High impact plastic, 94V0 polycarbonate, non-vented
Markings:Adhesive backed label or laser engraving

Prevention of Unauthorized Use

USB Power Delivery:In critical applications, the use of a non-authorized USB PD power adapter may pose a risk.

The power adapter's identity may be checked and validated prior to PD contract negotiation by use of USB PD Vendor Defined Messages (VDMs). The power adapter will respond to a USB PD “Discover Identity” VDM with 0x4754 in the “ProductID” field.

Additionally, a non-standard 15.1V PDO is included. Host systems may be designed to reject a power adapter which does not contain a 15.1V PDO.
Note 4:These measures do not ensure a secure implementation, and are only suggested as a method of risk mitigation.
Note 5:Please see our article Product Security and Risk Mitigation for USB Power Delivery (PD) Based Systems for additional information.

Special Options

Non-standard - Contact GlobTek

  1. Custom housing and output cord colors
  2. Custom fixed output cord length (1m, 2m, 3m lengths)
  3. Custom markings and marking methods
  4. Custom USB PD PDOs: Output voltages selectable between 3.3V and 21V, in 100mV increments
Derating CurveUser-added image
Qty (ea.)/Carton20
Individual Box/Gift Box Size (mm)Egg Crate
Individual Box/Gift Box Color
Master Carton Size (mm)427 x 405 x 158
Gross Weight (kg)15.6
Label Width (mm)50.0
Label Height (mm)110.0
Input Configuration
DescriptionIEC 60320/C18 AC Inlet connector, Class II, Non-Earth Ground

Mates with IEC 60320/C17 Plug
User-added image

Standard International IEC 320/C17 Cordsets
Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Please contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.
Part Number/ LinkCountryPlugTerminationLength (mm)Length (Ft)
209A4062M071(R)Argentina (Type I)IRAM 2063IEC320/C1720006.6
5014112M071A(R)Australia (Type I)AS3112IEC 320/C1720006
204B4062M071(R)Brazil (Type N)NRR 14136IEC320/C1720006.6
4533502M071(R)China (Type A)GB 2099.1IEC320/C1720006.6
2074232M071C(R)Europe (2.5A, Type C)CEE 7/7IEC 320/C1720006.6
489C4232M071A(R)Europe (10A)CEE 7/17IEC320/C1720006.6
208A41111M8071A(R)India (Type D)IS 1293IEC 320/C1718006
451J3322M071AJapan (Type A)JIS 8303IEC320/C1720006.6
401P1086F071A(R)North America (Type A)NEMA 1-15PIEC 320/C1718286
401P1219F71ANorth America (Type A)NEMA 1-15PIEC 320/C1727439
4033321M8071(R)Taiwan (Type A)CNS10917IEC 320/C1718006
6104232M071A(R)UK, Hong Kong, Singapore, Gulf States (Type G)BS1363 (Fuse 3A)IEC 320/C1720006.6
6303742M571A(R)Thailand (Type C)TIS 166-2549IEC 320/C1725008
Output Configuration
Common output connector options:
Click to add to your request.
L Type (Coaxial 5.5x2.5mm plug)
C Type (Coaxial 5.5x2.1mm plug)
K Type (Coaxial 3.5x1.3mm plug)
LL Type (5.5x2.5mm Locking 760k type)
CL Type (5.5x2.1mm Locking S761k type)
Magnetic Connector
L Type (Coaxial 5.5x2.5mm plug)C Type (Coaxial 5.5x2.1mm plug)K Type (Coaxial 3.5x1.3mm plug)LL Type (5.5x2.5mm Locking 760k type)CL Type (5.5x2.1mm Locking S761k type)Magnetic Connector
YL3 Type (KPPX-3P)
YL4 Type (KPPX-4P)
EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)
MSB Type (Micro USB)

Custom design
YL3 Type (KPPX-3P)YL4 Type (KPPX-4P)EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)MSB Type (Micro USB)USBC Type (USB Type C)Inquire for custom design

Comprehensive list of GlobTek output cordset options

Contact GlobTek for your specific requirements or custom solutions.

Approvals

Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

LogoDescription
User-added imagenull
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added image
 
Morocco SDoC declaration http://www.globtek.info/certs/Morocco%20SDoC%20Declaration/
RoHSSpecifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50469658, to J62368-1(H30) , J55032(H29),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: https://www.globtek.com/r2/Szj4Vb

No Logo Applicable

CB for IEC 60335-1:2010 (Fifth Edition) incl. Corr. 1:2010 and Corr. 2:2011 + A1:2013
Audio/Video, Information And Communication Technology Equipment - Part 1: Safety Requirements [UL 62368-1:2021 Ed.3] Audio/Video, Information And Communication Technology Equipment - Part 1: Safety Requirements [CSA C22.2#62368-1:2021 Ed.3]
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added image
 
Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
User-added imageUKCA Certification
User-added image  Declaration ДС № ЕАЭС N RU Д-US.КА01.В.10453_19 Custom Union of Russia, Belarus and Kazakhstan http://www.globtek.com/redirect/?loc=gost-certificate-eac-declaration
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://www.globtek.com/pdf/F-GT-DJD-8.4.1-006%20China%20RoHS%20Declaration%205-20-22.pdf
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case

No Logo Applicable

IEC 61558-1:2005+A1, IEC 61558-2-16:2009+A1

User-added image  
CE Certification
Request Info