Information
Model NumberGTM86100-10VV-W2E-USBC
Agency Documentshttp://www.globtek.info/certs/GTM86100-USBC
CE EC-Declaration for Medicalhttps://cs.globtek.info/ec_declaration?id=a0OVv0000029zsjMAA
CE EC-Declaration for Industrial/Commercial/ITEhttps://cs.globtek.info/ec_declaration?id=a0OVv0000029zsjMAA
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for Medicalhttps://cs.globtek.info/ukca_declaration?id=a0OVv0000029zsjMAA
UKCA-Declaration for Industrial/Commercial/ITEhttps://cs.globtek.info/ukca_declaration?id=a0OVv0000029zsjMAA
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://cs.globtek.info/Morocco_SDoC_Declaration?id=a0OVv0000029zsjMAA
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0OVv0000029zsjMAA
Prop 65 Statementhttps://www.globtek.com/r2/PH7CNf
REACH Declarationhttps://www.globtek.com/r2/eM2co8
Conflict Minerals Declarationhttps://www.globtek.com/r2/vZY8R5
Model Parameters
TypeWall Plug-in
TechnologyAC/DC Switching Adapter with USB Power Supply AC Adaptor
CategoryICT / ITE / Medical Power Supply
Input Voltage Range (V)100-240V~, 50-60Hz
Max Input Current (A)0.3A
Max Output Power Rating (W)10
Output Voltage Range (V)5-5.2
EfficiencyUSA DOE Level VI / Eco-design Directive 2009/125/EC, (EU) 2019/1782
Ingress Protection
Size (mm)74.6*23.9*38.59 +/-1.0
EnclosureUser-added image

 
3D File Downloadhttps://www.globtek.com/file/dl/gtm86100-10vv-w2e-usb_asm.stp
Rating Table
Model Number (Final ordering #/Part No to be defined)Voltage (V)Current (A)Power (W)RFQ
* (Final ordering #/Part No to be defined)
Specifications

Input

Input Voltage:Specified: 85-264VAC, Nameplate: 100-240VAC
Input Frequency:Specified: 47-63Hz, Nameplate: 50-60Hz
No Load Input Power:<75mW @ 230VAC (EU CoC Tier 2 compliant)
Inrush Current:30A @ 115VAC, 60A @ 230VAC typ. (at peak of AC line, cold start)
Efficiency:78.7% min. (CEC&DOE Level VI compliant), 79.0% min. (EU CoC Tier 2 compliant)

Output

Turn-on Delay:3 seconds max.
Rise-Time:100ms max.
Output Regulation± 5% (measured at the end of a 1.2m long 20AWG USB cordset)
Ripple:100mV (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW)
Transient Response:10% max. deviation (with 25-75% load step), 1ms max. recovery time 
Hold-up Time:5ms min. (100VAC and full load)

Protections

Input Protection:MOV transient suppressor, input line fusing
Over-Current Protection:110% to 150%, auto-restart
Over-Voltage Protection:10VDC max. (Zener clamp)
Short-Circuit Protection:Auto-restart
Over-Temperature Protection:Auto-restart, on-chip temperature sensor

Environmental

MTBF:1,500,000 hours @ 25°C ambient, full load (Telcordia SR-332, Issue 3)
Operating Temperature:0°C to 40°C (full load)
Operating Humidity:20% to 85% relative humidity, non-condensing
Storage Conditions:-20°C to 60°C / 5% to 95% relative humidity, non-condensing
Cooling:Natural convection

Safety

Certifications:IEC60601-1
IEC60601-1-11
IEC62368-1
Dielectric Withstand Voltage:4000VAC or 5656VDC (primary-to-secondary)
5mA, 1 minute
Output Touch Current:NC: 100µA max.
SFC: 500µA max.
Earth Leakage CurrentN/A, Class II input (No protective earth pin, therefore earth leakage is not measured)
Means of Protection:2 x MOPP (primary-to-secondary)

EMC

Certifications:IEC60601-1-2
EN55032 (CISPR32)
EN55035 (CISPR35)
Conducted Emissions:Class B, FCC Part 15, Class B (with resistive load)
Radiated Emissions:Class B, FCC Part 15, Class B (with resistive load)
Harmonic Current Voltage Distortion:EN61000-3-2, Class A
Voltage Fluctuations/Flicker:EN61000-3-3
Electrostatic Discharge (ESD) Immunity:EN61000-4-2, 8KV contact discharge, 15KV air discharge, Criterion A
Radiated RF Immunity:EN61000-4-3, 10V/m (80MHz-2.7GHz), Table 9, 9-28V/m (385MHz-5.78GHz ), Criterion A
EFT/Burst Immunity:EN61000-4-4, 2KV/100kHz., Criterion A
Line Surge Immunity:EN61000-4-5, 2KV differential, Criterion A
Conducted RF Immunity:EN61000-4-6, 3VRMS, 80% 1KHz AM, Criterion A
Power Frequency Magnetic Field Immunity:EN61000-4-8, N/A
Voltage Dip Immunity:EN61000-4-11, Criterion A/B

Enclosure

Housing:High impact plastic, PC+ABS 94V0, non-vented
Markings:Laser marked or adhesive-backed label

 

Derating CurveUser-added image
Qty (ea.)/Carton300
Individual Box/Gift Box Size (mm)43(L)*30(W)*95
Individual Box/Gift Box Color43(L)*30(W)*95
Master Carton Size (mm)485 x 335 x 305
Gross Weight (kg)12
Label Width (mm)37.0
Label Height (mm)19.0
Input Configuration
DescriptionEuropean CEE 7/16 configuration:EN 50075 Europlug 2 PINThe prongs of the Europlug are 19 mm long. They consist of a 9 mm long conductive tip of 4 mm diameter with a rounded ending, followed by a 10 mm long flexible insulated shaft of not more than 3.8 mm diameter. The two prongs are not exactly parallel and converge slightly; their centres are 19 mm apart at the tip and 18.6 mm apart at the base. The elasticity of the converging prongs provides sufficient contact force for the Europlug's current rating with a variety of socket-hole arrangements. The entire plug is 35.3 mm wide and 13.7 mm high, and must not exceed these dimensions within 18 mm behind its front plane (this allows for the recesses on many European socket types). The left and right side of the plug are formed by surfaces that are at 45° relative to the horizontal plan.

User-added image
Output Configuration
Common output connector options:
Click to add to your request.
L Type (Coaxial 5.5x2.5mm plug)
C Type (Coaxial 5.5x2.1mm plug)
K Type (Coaxial 3.5x1.3mm plug)
LL Type (5.5x2.5mm Locking 760k type)
CL Type (5.5x2.1mm Locking S761k type)
Magnetic Connector
L Type (Coaxial 5.5x2.5mm plug)C Type (Coaxial 5.5x2.1mm plug)K Type (Coaxial 3.5x1.3mm plug)LL Type (5.5x2.5mm Locking 760k type)CL Type (5.5x2.1mm Locking S761k type)Magnetic Connector
YL3 Type (KPPX-3P)
YL4 Type (KPPX-4P)
EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)
MSB Type (Micro USB)
Custom design
YL3 Type (KPPX-3P)YL4 Type (KPPX-4P)EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)MSB Type (Micro USB)Inquire for custom design

Comprehensive list of GlobTek output cordset options

Contact GlobTek for your specific requirements or custom solutions.