GTM86100-10VV-W2U-USB2C
GTM86100-10VV-W2U-USB2C AC/DC Switching Adapter with USB Power Supply AC AdaptorGTM86100-10VV-W2U-USB2C, ICT / ITE / Medical Power Supply, Wall Plug-in, AC/DC Switching Adapter with USB Power Supply AC Adaptor, , Input Rating: 100-240V~, 50/60Hz, UK BS 1363, 2 Blade w/Dummy Ground Class II, Output Rating: 10 Watts, Power rating with convection cooling (W) , 5-5.2V in 0.1V increments, Approvals:
Information
Model NumberGTM86100-10VV-W2U-USB2C
Agency Documentshttp://www.globtek.info/certs/GTM86100-USBC
CE EC-Declaration for Medicalhttps://cs.globtek.info/ec_declaration?id=a0OVv000002GwenMAC
CE EC-Declaration for Industrial/Commercial/ITEhttps://cs.globtek.info/ec_declaration?id=a0OVv000002GwenMAC
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for Medicalhttps://cs.globtek.info/ukca_declaration?id=a0OVv000002GwenMAC
UKCA-Declaration for Industrial/Commercial/ITEhttps://cs.globtek.info/ukca_declaration?id=a0OVv000002GwenMAC
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://cs.globtek.info/Morocco_SDoC_Declaration?id=a0OVv000002GwenMAC
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0OVv000002GwenMAC
Prop 65 Statementhttps://www.globtek.com/r2/PH7CNf
REACH Declarationhttps://www.globtek.com/r2/eM2co8
Conflict Minerals Declarationhttps://www.globtek.com/r2/vZY8R5
Model Parameters
TypeWall Plug-in
TechnologyAC/DC Switching Adapter with USB Power Supply AC Adaptor
CategoryICT / ITE / Medical Power Supply
Input Voltage Range (V)100-240V~, 50/60Hz
Max Input Current (A)0.3A
Max Output Power Rating (W)10
Output Voltage Range (V)5-5.2
EfficiencyUSA DOE Level VI / Eco-design Directive 2009/125/EC, (EU) 2019/1782
Ingress Protection
Size (mm)60.0*41.2*48.9 +/-1.0
Enclosure
User-added image
3D File Downloadhttps://www.globtek.com/file/dl/gtm86100-10vv-w2k-usb_asm.stp
Rating Table
Model Number (Final ordering #/Part No to be defined)Voltage (V)Current (A)Power (W)RFQ
* (Final ordering #/Part No to be defined)
Specifications

Input

Input Voltage:Specified: 85-264VAC, Nameplate: 100-240VAC
Input Frequency:Specified: 47-63Hz, Nameplate: 50-60Hz
No Load Input Power:<75mW @ 230VAC (EU CoC Tier 2 compliant)
Inrush Current:30A @ 115VAC, 60A @ 230VAC typ. (at peak of AC line, cold start)
Efficiency:78.7% min. (CEC&DOE Level VI compliant), 79.0% min. (EU CoC Tier 2 compliant)

Output

Turn-on Delay:3 seconds max.
Rise-Time:100ms max.
Output Regulation± 5% (measured at the end of a 1.2m long 20AWG USB cordset)
Ripple:100mV (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW)
Transient Response:10% max. deviation (with 25-75% load step), 1ms max. recovery time 
Hold-up Time:5ms min. (100VAC and full load)

Protections

Input Protection:MOV transient suppressor, input line fusing
Over-Current Protection:110% to 150%, auto-restart
Over-Voltage Protection:10VDC max. (Zener clamp)
Short-Circuit Protection:Auto-restart
Over-Temperature Protection:Auto-restart, on-chip temperature sensor

Environmental

MTBF:1,500,000 hours @ 25°C ambient, full load (Telcordia SR-332, Issue 3)
Operating Temperature:0°C to 40°C (full load)
Operating Humidity:20% to 85% relative humidity, non-condensing
Storage Conditions:-20°C to 60°C / 5% to 95% relative humidity, non-condensing
Cooling:Natural convection

Safety

Certifications:IEC60601-1
IEC60601-1-11
IEC62368-1
Dielectric Withstand Voltage:4000VAC or 5656VDC (primary-to-secondary)
5mA, 1 minute
Output Touch Current:NC: 100µA max.
SFC: 500µA max.
Earth Leakage CurrentN/A, Class II input (No protective earth pin, therefore earth leakage is not measured)
Means of Protection:2 x MOPP (primary-to-secondary)

EMC

Certifications:IEC60601-1-2
EN55032 (CISPR32)
EN55035 (CISPR35)
Conducted Emissions:Class B, FCC Part 15, Class B (with resistive load)
Radiated Emissions:Class B, FCC Part 15, Class B (with resistive load)
Harmonic Current Voltage Distortion:EN61000-3-2, Class A
Voltage Fluctuations/Flicker:EN61000-3-3
Electrostatic Discharge (ESD) Immunity:EN61000-4-2, 8KV contact discharge, 15KV air discharge, Criterion A
Radiated RF Immunity:EN61000-4-3, 10V/m (80MHz-2.7GHz), Table 9, 9-28V/m (385MHz-5.78GHz ), Criterion A
EFT/Burst Immunity:EN61000-4-4, 2KV/100kHz., Criterion A
Line Surge Immunity:EN61000-4-5, 2KV differential, Criterion A
Conducted RF Immunity:EN61000-4-6, 3VRMS, 80% 1KHz AM, Criterion A
Power Frequency Magnetic Field Immunity:EN61000-4-8, N/A
Voltage Dip Immunity:EN61000-4-11, Criterion A/B

Enclosure

Housing:High impact plastic, PC+ABS 94V0, non-vented
Markings:Laser marked or adhesive-backed label

 

Derating CurveUser-added image
Qty (ea.)/Carton300
Individual Box/Gift Box Size (mm)43(L)*30(W)*75
Individual Box/Gift Box Color43(L)*30(W)*75
Master Carton Size (mm)485 x 335 x 305
Gross Weight (kg)12
Label Width (mm)37.0
Label Height (mm)19.0
Input Configuration
DescriptionUK BS 1363, 2 Blade w/Dummy Ground Class II

The line and neutral pins have a rectangular cross section 6.35 mm by 4.0 mm, 17.7 mm long and with centres 22.2 mm apart. The protective-earth pin is a rectangular cross section 8.0 mm by 4.0 mm, 22.3 mm long and with a centre line 22.2 mm from the line/neutral pin centre line. The dimensions were originally specified in decimal inches with asymmetric tolerances and redefined as minimum and maximum metric dimensions in BS 1363:1984.
Dimensions are chosen to provide safe clearance to live parts. The distance from any part of the line and neutral pins to the periphery of the plug base must be not less than 9.5 mm. This ensures that nothing can be inserted alongside a pin when the plug is in use, and helps keep fingers away from the pins. The minimum insertion distance from the face of the socket-outlet to the first point of contact with a live part is 9.6 mm.
The "Dummy" longer earth pin ensures that the earth path is connected before the live pins, and remains connected after the live pins are removed. The earth pin is too large to be inserted into the line or neutral sockets by mistake.
User-added image

Output Configuration
Common output connector options:
Click to add to your request.
L Type (Coaxial 5.5x2.5mm plug)
C Type (Coaxial 5.5x2.1mm plug)
K Type (Coaxial 3.5x1.3mm plug)
LL Type (5.5x2.5mm Locking 760k type)
CL Type (5.5x2.1mm Locking S761k type)
Magnetic Connector
L Type (Coaxial 5.5x2.5mm plug)C Type (Coaxial 5.5x2.1mm plug)K Type (Coaxial 3.5x1.3mm plug)LL Type (5.5x2.5mm Locking 760k type)CL Type (5.5x2.1mm Locking S761k type)Magnetic Connector
YL3 Type (KPPX-3P)
YL4 Type (KPPX-4P)
EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)
MSB Type (Micro USB)
Custom design
YL3 Type (KPPX-3P)YL4 Type (KPPX-4P)EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)MSB Type (Micro USB)Inquire for custom design

Comprehensive list of GlobTek output cordset options

Contact GlobTek for your specific requirements or custom solutions.