GTM43007-AWWVV-F (D3 with standoffs) Open Frame/Internal ICT / ITE / Medical Power Supply
| GTM43007-AWWVV-F (D3 with standoffs) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
 | GTM43007-AWWVV-F (D3 with standoffs), ICT / ITE / Medical Power Supply, 60601-1-4th Ed. , Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, Solder Pins for Line and Neutral, 1.14 mm square pins, 11.43 mm long, Output Rating: 60 Watts, Power rating with convection cooling (W) , 5-48V in 0.1V increments, Approvals: CB 60950; Fuse 60335; Book 60601; CB 60601-1 2MOPP (6W max); CB 62368; China RoHS; Class I; RoHS; Ukraine; WEEE; CE; FCC; cETLus ES60601; cETLus; cETLus 60601-1 3rd; Level V; WDaE; Fuse 60335; CE; ETL 62368; EAC; CB EN/IEC 60335-1; UKCA; Conforms to 62368-1; CCC; | ||||||||
Information | |||||||||
| Model Number | GTM43007-AWWVV-F (D3 with standoffs) | ||||||||
| Agency Documents | http://www.globtek.info/certs/GTM43007/ | ||||||||
| CE EC-Declaration for Medical | https://cs.globtek.info/ec_declaration?id=a0O0c00000PIXPlEAP | ||||||||
| CE EC-Declaration for Industrial/Commercial/ITE | https://cs.globtek.info/ec_declaration?id=a0O0c00000PIXPlEAP | ||||||||
| CE EC-Declaration for Household | Contact GlobTek for more information | ||||||||
| UKCA-Declaration for Medical | https://cs.globtek.info/ukca_declaration?id=a0O0c00000PIXPlEAP | ||||||||
| UKCA-Declaration for Industrial/Commercial/ITE | https://cs.globtek.info/ukca_declaration?id=a0O0c00000PIXPlEAP | ||||||||
| UKCA-Declaration for Household | Contact GlobTek for more information | ||||||||
| Morocco SDoC Declaration | https://cs.globtek.info/Morocco_SDoC_Declaration?id=a0O0c00000PIXPlEAP | ||||||||
| RoHS/RoHS3 Declaration | https://www.globtek.com/pdf/rohs_cert/a0O0c00000PIXPlEAP | ||||||||
| Prop 65 Statement | https://www.globtek.com/r2/PH7CNf | ||||||||
| REACH Declaration | https://www.globtek.com/r2/eM2co8 | ||||||||
| Conflict Minerals Declaration | https://www.globtek.com/r2/vZY8R5 | ||||||||
Model Parameters | |||||||||
| Type | Open Frame/Internal | ||||||||
| Technology | Regulated Switchmode AC-DC Power Supply AC Adaptor | ||||||||
| Category | ICT / ITE / Medical Power Supply | ||||||||
| Input Voltage Range (V) | 100-240V~, 50-60 Hz | ||||||||
| Max Input Current (A) | 1.5A | ||||||||
| Max Output Power Rating (W) | 60 | ||||||||
| Output Voltage Range (V) | 5-48 | ||||||||
| Efficiency | N/A | ||||||||
| Ingress Protection | N/A | ||||||||
| Size (mm) | 76.2x50.8x23.6 for 5V-14V models, 76.2x50.8x22.5 for 15V-48V modelsTop Diagram i | ||||||||
| Enclosure | Top Diagram is for 5V-14V models, Bottom Diagram is for 15V-48V models INPUT CONNECTOR for POWER INPUT CONNECTOR for GND | ||||||||
Rating Table | |||||||||
* (Final ordering #/Part No to be defined) | |||||||||
Specifications | |||||||||
| A) ELECTRICAL SPECIFICATIONS: 01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac 02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz 03. Output Regulation: +/- 3% measured at the output connector 04. Line Voltage Regulation: +/- 0.5% maximum measured at full load 05. Output Ripple (Vp-p): 1% or 150 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with a low impedance 47 uf electrolytic capacitor connected 3” from the output connector . 06. Turn-ON/OFF: 5% maximum,1 mS typical recovery time for 25% step load 07. Turn-ON Delay: 3 Sec max 08. Hold-Up Time:8 mS typical @ nominal input voltage and full load 09. Inrush Current: 80A maximum @ 115 Vac input, 160A maximum @ 230 Vac input 10. Switching Frequency: 65 KHz typical 11. Efficiency: 87% @115Vac, 89% @ 230Vac typical at full load 12. No Load Power: < 300mW @ 230Vac B) PROTECTION 01. Overvoltage Protection: 110% to 130% of nominal output voltage, and less than 60Vdc 02. Short Circuit/Over-load: momentary short circuit protected, output will auto recover upon removal of short 03. Input Protection: Input line fusing and 300Vac MOV C) SAFETY 01. Dielectric Withstand Voltage: 4000Vac / 5656Vdc from primary to secondary 02. Output Isolation Options: Class I or Class II 03. Earth Leakage Current: Does not exceed 300uA in NORMAL CONDITION and 1000uA in SINGLE FAULT CONDITION 04. Output Leakage Current: Does not exceed 75uA NC(Normal condition) 300uA SFC(single fault condition) 05. Means of Protection: 2 x MOPP 06. Compliant Standards: See listings at end of this drawing for specifics D) EMC EN 60601-1-2, 4th edition Emissions, per EN 55032, EN 61000-6-3, EN 61000-6-4, CISPR11 and CISPR22 Conducted Emissions: Class B, FCC Part 15, Class B Radiated Emissions: Class B, FCC Part 15, Class B Line Frequency Harmonics EN61000-3-2, Class A Voltage Fluctuations/Flicker EN61000-3-3 Immunity, per EN 55024, EN 61000-6-1, EN 61000-6-2 Static Discharge Immunity EN61000-4-2, 10kV Contact Discharge, 20kV air discharge Radiated RF Immunity EN61000-4-3, 10V/m 80-1000MHz, 3V/m 1-2.7GHz, 80% 1KHz AM. EFT/Burst Immunity EN61000-4-4, 4kV/100kHz. Line Surge Immunity EN61000-4-5, 2kV differential, 4kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms, 80% 1KHz AM Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11, Criteria E) OTHER 01. MTBF: 1,000,000 Hours @ 45°C ambient temperature, Full Load 02. Operating Temperature: -10°C to 45°C ambient temperature 03. Humidity: 0% to 95% relative humidity 04. Storage Temperature: -30°C to 80°C 05. Cooling: Convection 06: Elevation: 5000M 07. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006 F) MECHANICAL FORMAT 01. Type: Open Frame 02. Size: A suffix version, (2”x3”), 76.2 x 50.8 x 30.5 mm 03. Size: B suffix version, (2”x4”), 101.6 x 50.8 x 30.5 mm 04. Size: C suffix version, (3”x5”), 127.0 x 76.2 x 30.5 mm G) SPECIAL OPTIONS 01. Custom Label Markings 02. Short term Output Surge Capability 03. Reduced Leakage Current versions 04. Tightened output voltage tolerance 05. Reduced output ripple level 06. High Rel PCB laminate with Plated through Holes for IPC610 Class 2 Compliance 07. Low Temperature operation, down to -40°C 08. Quasi Constant Current Output, for Lead-Acid Battery Charger Applications 09. Special Input or Output Connectors 10. Over-Temperature Protection, Latched Shut-Down | |||||||||
| Derating Curve | |||||||||
| Qty (ea.)/Carton | 124 | ||||||||
| Individual Box/Gift Box Size (mm) | 95*65*35 | ||||||||
| Individual Box/Gift Box Color | White | ||||||||
| Master Carton Size (mm) | 442 x 330 x 275 | ||||||||
| Gross Weight (kg) | 15.2 | ||||||||
| Label Width (mm) | null | ||||||||
| Label Height (mm) | null | ||||||||
Input Configuration | |||||||||
| Description | Solder Pins for Line and Neutral, 1.14 mm square pins, 11.43 mm long | ||||||||
| Approvals | |||||||||
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice. Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation. | |||||||||
| |||||||||