GTM965500P GTM965500P, ICT / ITE / Medical Power Supply, Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, Forced airflow for full rated power (CFM): 10CFM, Input Rating: 100-240V~, 50-60 Hz, , Output Rating: 550 Watts, Power rating with convection cooling (W) 300W, 12-54V in 0.1V increments, Approvals: UKCA; Conforms to 62368-1; Morocco; GTM965500P, ICT / ITE / Medical Power Supply, Open Frame/Internal, Regulated Switchmode AC-DC Power Supply AC Adaptor, Forced airflow for full rated power (CFM): 10CFM, Input Rating: 100-240V~, 50-60 Hz, , Output Rating: 550 Watts, Power rating with convection cooling (W) 300W, 12-54V in 0.1V increments, Approvals: UKCA; Conforms to 62368-1; Morocco; Information Model Number GTM965500P CE EC-Declaration for Medical https://cs.globtek.info/ec_declaration?id=a0O3a00000Ly9m5EAB CE EC-Declaration for Industrial/Commercial/ITE https://cs.globtek.info/ec_declaration?id=a0O3a00000Ly9m5EAB CE EC-Declaration for Household Contact GlobTek for more information UKCA-Declaration for Medical https://cs.globtek.info/ukca_declaration?id=a0O3a00000Ly9m5EAB UKCA-Declaration for Industrial/Commercial/ITE https://cs.globtek.info/ukca_declaration?id=a0O3a00000Ly9m5EAB UKCA-Declaration for Household Contact GlobTek for more information Morocco SDoC Declaration https://cs.globtek.info/Morocco_SDoC_Declaration?id=a0O3a00000Ly9m5EAB RoHS/RoHS3 Declaration https://www.globtek.com/pdf/rohs_cert/a0O3a00000Ly9m5EAB Prop 65 Statement https://en.globtek.com/prop-65-statement.pdf REACH Declaration https://www.globtek.com/pdf/iso_certificates/REACH.pdf Conflict Minerals Declaration https://www.globtek.com/pdf/conflict-minerals.pdf Model Parameters Type Open Frame/Internal Technology Regulated Switchmode AC-DC Power Supply AC Adaptor Category ICT / ITE / Medical Power Supply Input Voltage Range (V) 100-240V~, 50-60 Hz Max Input Current (A) 6A Max Output Power Rating (W) 550 Output Voltage Range (V) 12-54 Auxiliary/Fan Output Voltage (V) 12 Auxiliary/Fan Output Power (W) 14.4W Forced Air, 10W Convection Efficiency USA DOE Level VI / Eco-design Directive 2009/125/EC, (EU) 2019/1782 Ingress Protection N/A Size (mm) 127.0 (L) x 76.2 (W) x 34.3 (H) Enclosure Rating Table Model Number (Final ordering #/Part No to be defined) Voltage Amps (Convection) Amps (Forced Air) Watts (Convection) Watts (Forced Air) RFQ
* (Final ordering #/Part No to be defined)
Specifications Features High power density 3" x 5"� format Full power rating at 50°C ambient and 90VAC Auxiliary +12V fan and +5V standby outputs Power-good, remote-off, & remote-sense Output voltage fine adjustment 20ms min. holdup time for full power range Available with earthed output or floating output (with FE) ITE/ICT and medical (2 x MOPP) certified Input Input Voltage: Specified: 90-264VAC, Nameplate: 100-240VAC Input Frequency: Specified: 47-63Hz, Nameplate: 50-60Hz Input Current: 6.0A typ. @ 90VAC, 5.0A typ. @ 115VAC, 2.5A typ. @ 230VAC (full load) No Load Input Power: <500mW, 230VAC Inrush Current: <35A @ @ 100VAC , <70A @ 230VAC (cold start @ 25°C) Efficiency: 90 - 95% typ. Power Factor: >0.95 @ 115Vac, >0.90 @ 230VAC (full load)
Main Output Total Output Power 300W (natural convection) Turn-on Delay: < 2 seconds @ 100VAC Output Voltage Regulation: ± 2.5% (set point tolerance + load/line regulation, measured at output connector) Load Regulation: ± 1.0% (measured at output connector) Line Regulation: ± 0.5% (measured at output connector) Ripple: 1% pk-pk (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW) Transient Response: <5% deviation (with 150W load step), recovery to within 1% in 1ms Startup Overshoot: <5% Hold-up Time: 20ms min. (100VAC, full load) Power-Good (PG): Yes, signal typically goes low ~10ms ahead of AC power failure or protection state Remote-Off (/EN): Yes, pull 'Remote Off' to -Vout to disable main output, leave floating otherwise Remote-Sense: Up to 500mV total cable-drop compensation, reverse and short circuit protected Output Voltage Fine Adjustment: Yes, via potentiometer, ±5% adjustment range
Standby Output Output Voltage: 5V Output Current: 1A Output Voltage Regulation: ± 4.0% (set point + load/line/cross regulation) Ripple: 2% pk-pk (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW) Hold-Up Time: 20ms min. (115VAC, full load on main output) Always On? Yes
Fan Output Output Voltage: 12V Output Current: 0.5A Output Voltage Regulation: ± 15.0% (set point tolerance + load/line/cross regulation) Ripple: 1% pk-pk (using a 47µF low-ESR cap + 0.1µF ceramic capacitor, measured @ 20MHz BW) Always On? Yes
Protections Input Protection: MOV transient suppressor, dual high breaking capacity fuses Over-Voltage Protection: 110-150%. Latched-off, cycle AC to reset Over-Current Protection: 105-150% typ. Non-latched with auto-recovery Short Circuit Protection: Non-latched with auto-recovery Over-Temperature Protection: Latched-off, cycle AC to reset
Environmental MTBF: 1,500,000 hours @ 25°C ambient, full load (Telcordia SR-332, Issue 3) Operating Temperature: -20°C to 50°C (full output power), -20°C to 80°C (with derating) Storage Temperature: -40°C to 85°C Humidity: 0% to 95% relative humidity, non-condensing Altitude: 5000m max. Vibration: Conforms to EN60068-2-6
Safety Certifications: IEC60601-1 Dielectric Withstand Voltage: 4000VAC (primary-to-secondary) Output Touch Current: NC: <100µA SFC: <500µA Earth Leakage Current NC: <200µA SFC: <1.0mA Means of Protection: 2 x MOPP (primary-to-secondary)
EMC Certifications: IEC60601-1-2 Conducted Emissions: Class B, FCC Part 15 (with resistive load) Radiated Emissions: Class B, FCC Part 15 (with resistive load) Harmonic Current Voltage Distortion: EN61000-3-2, Class A Voltage Fluctuations/Flicker: EN61000-3-3 Electrostatic Discharge (ESD) Immunity: EN61000-4-2, 10KV contact discharge, 20KV air discharge (applied to input, output, or control connectors) Radiated RF Immunity: EN61000-4-3, 10V/m 80-2700MHz, 80% 1KHz AM. EFT/Burst Immunity: EN61000-4-4, 4KV/100kHz. Line Surge Immunity: EN61000-4-5, 2KV differential, 4KV common-mode Conducted RF Immunity: EN61000-4-6, 3VRMS, 80% 1KHz AM Power Frequency Magnetic Field Immunity: EN61000-4-8, 30A/m Voltage Dip Immunity: EN61000-4-11
Mechanical Dimensions (nom.) 127.0 x 76.2 x 33.4mm (5.00" x 3.00" x 1.31") [33.4mm = tallest top-side component + PCB thickness] Dimensions (nom.) 127.0 x 76.2 x 39.7mm (5.00" x 3.00" x 1.56") Dimensions (nom.) 138.5 x 87.7 x 55.9mm (5.45" x 3.45" x 2.20") Dimensions (nom.) 158.5 x 87.7 x 45.9mm (6.24" x 3.45" x 1.81") Fan Audible Noise: 28.5dBA typ. Fan Audible Noise: 27.5dBA typ.
Input/Output Connectors Input Connector (J1): Connector on PCB: JST B3P5-VH(LF)(SN) Main Output Connectors (J2, J3): Connector on PCB: CNNT ACTB025-C (M4 PCB terminal) Standby Output + Signal Connector (J4): Connector on PCB: Amphenol 98414-G06-06LFSB Fan Output Connector (J5): Connector on PCB: Molex 22-04-1021FAN | 2: V- (COM) Earth connection: Connect four M3 mounting holes to earth (mounting to a metal plate is recommended)
Derating Curve Qty (ea.)/Carton Individual Box/Gift Box Size (mm) Individual Box/Gift Box Color Master Carton Size (mm) TBD Gross Weight (kg) Label Width (mm) TBD Label Height (mm) TBD Input Configuration Description Approvals Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.
Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.
Logo Description UKCA Certification Conforms to UL STD. 62368-1 Conforms to UL STD. 62368-1 Certified to CSA STD C22.2 NO.62368-1 Morocco SDoC declaration http://www.globtek.info/certs/Morocco%20SDoC%20Declaration/
Popular Products (Stock items) SKU Volts Out Current Out (Amps) Connector RFQ Sample Request 2803448 12.0 45.8 RFQ Sample Request
