GTD9X1203-WWWVV-TW
GTD9X1203-WWWVV-TW DC-DCGTD9X1203-WWWVV-TW, ICT / ITE / Medical Power Supply/Class 2/Household Power Supply, Desktop/External, DC-DC, , Input Rating: 12Vdc, , Output Rating: 120 Watts, Power rating with convection cooling (W) , 12-54V in 0.1V increments, Approvals:
Information
Model NumberGTD9X1203-WWWVV-TW
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://cs.globtek.info/Morocco_SDoC_Declaration?id=a0OVv0000039TAjMAM
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0OVv0000039TAjMAM
Prop 65 Statementhttps://www.globtek.com/r2/PH7CNf
REACH Declarationhttps://www.globtek.com/r2/eM2co8
Conflict Minerals Declarationhttps://www.globtek.com/r2/vZY8R5
Model Parameters
TypeDesktop/External
TechnologyDC-DC
CategoryICT / ITE / Medical Power Supply/Class 2/Household Power Supply
Input Voltage Range (V)12Vdc
Max Input Current (A)14.0A
Max Output Power Rating (W)120
Output Voltage Range (V)12-54
Efficiency
Ingress ProtectionIP43
Size (mm)149.4 x 62.6 x 33.5
Enclosure




User-added image

 
Rating Table
Preferred ratings shown below.
Custom output voltages available in 0.1V increment from the minimum voltage listed to the maximum voltage listed; contact sales.
Model Number (Final ordering #/Part No to be defined)Voltage (V)Current (A)Power (W)RFQ
GTD9X1203-12024-TW*245.000120
GTD9X1203-WWWVV-TW-XXXXCUSTOMCUSTOMCUSTOM
* (Final ordering #/Part No to be defined)
Specifications

 

Features

  • 2 x MOPP medical isolation
  • EMS-ready per IEC60601-1-12
  • Wide "universal" DC input range
  • 130W short-term power capability (optional)

Input

Input Voltage Range:12VDC (nameplate / nominal)
10.2 - 16.0VDC (rated)

Plus short-term capability between 9.0 - 10.2V. (Duration is limited by temperature rise.)
Input Current:TBD (typ.) @ 12VDC / 120W
TBD (max.) @ 10.2VDC / 120W
No Load Input Power:< 0.5W
Efficiency:TBD @ 12VDC

Output

Turn-on Delay:< 2 seconds
Output Regulation:+1.5% / -4% max. (measured at the output connector)
Line Regulation:± 0.1 % typ.  (measured at the output connector)
Ripple:1% max. (using a 10µF low-ESR electrolytic cap + 0.1µF ceramic cap, measured @ 20MHz BW, at the output connector)
Transient Response (Step Load):10% max. deviation, 2ms max. recovery time (with 120W load step)
Transient Response
(Load Dump):
5% max. deviation, 100ms max. recovery time (with 120W load dump)

Protections

Input Protection:Input line fusing (high-breaking capacity)
Reverse polarity protection (up to -16VDC)
Input Under-Voltage Protection:Shut down @ 7.4V (typ.), Restore @ 9.0V (max.)
Output Over-Voltage Protection:110 - 130%, Latching, cycle DC input voltage to reset
Output Over-Current Protection:110 - 150%, Auto-recovery
Output Short-Circuit Protection:Auto-recovery
Over-Temperature Protection:Latching, cycle DC input voltage to reset

Environmental

MTBF:> 1,500,000 hours @ 25°C ambient (Telcordia SR-332, Issue 3)
Operating Temperature:-10°C to 40°C (120W)
Check derating curve for T > 40°C.
Storage Temperature:-40°C to 80°C
Humidity:0% to 95% relative humidity, non-condensing
Altitude5000m
Cooling:Natural convection
Shock:End use handling: Half-sine, <3ms duration, 1.65m/s, 3 shocks per face
Transportation simulation: Trapezoid, 60G acceleration, 5.75m/sec, 3 shocks per face
General shock: Half-sine, 100G acceleration, 6ms duration, 3 shocks per face
Vibration:IEC60601-1-12, Section 10.1.3, Clause B
Bump:EN1789, Clause 6.4.1
Drop:EN1789, Clause 6.4.2
Ingress Protection:IP43
RoHS:Complies with EU 2015/863 and China SJ/T 11363-2006

Safety

Compliant Standards:General medical: IEC60601-1
Emergency medical services (EMS): IEC60601-1-12
Dielectric Withstand Voltage (Hi-Pot):4300VDC from input to output,  1 minute
4300VDC from input to case, 1 minute
1000VAC from output to case, 1 minute
Output Leakage Current:NC: 8µA max.
SFC: 40µA max.
Means of Protection (Primary-to-Secondary):2 x MOPP
Protection Class:Class II (reinforced insulation)

EMC

Compliant Standards:Medical: IEC60601-1-2
Conducted Emissions:CISPR25, Class 2
(measured with resistive load)
Radiated Emissions:CISPR25, Class 2
(measured with resistive load)
Electrical Transient Conduction Along Supply Lines:ISO7637-2:
   Test Pulse 1:  - 112V (500 pulses), Class A
   Test Pulse 2a: + 55V (500 pulses), Class A
   Test Pulse 2b: + 10V  (10 pulses), Class A
   Test Pulse 3a: - 165V  (1 hour), Class A
   Test Pulse 3b: + 112V (1 hour), Class A
(The above test levels correspond to "Severity Level III")

ISO16750-2:
   Starting Profile: Level I: Class A; Level II/III/IV: Class C (Supply voltage 'Code C')
   Load Dump: Test Pulse B : Us* = 35V, Ri = 0.5Ω, td = 400ms, Class A (Severity 4)
Electrostatic Discharge (ESD) Immunity:EN61000-4-2, 10KV contact discharge, 18KV air discharge, Criterion A
Radiated RF Immunity:EN61000-4-3, 20V/m @ 80MHz - 2.7GHz, 80% 1KHz AM, 80% 5Hz AM, Criterion A
Conducted RF Immunity:EN61000-4-6, 3VRMS & 6VRMS (ISM & Amateur bands), 80% 1KHz AM, Criterion A

Enclosure

Housing:High impact plastic, 94V0 polycarbonate, non-vented
Markings:Adhesive backed label or laser engraving
Derating CurveUser-added image
 
Qty (ea.)/Carton60
Individual Box/Gift Box Size (mm)Egg Crate
Individual Box/Gift Box ColorEgg Crate
Master Carton Size (mm)480 x 450 x 205
Gross Weight (kg)15.2
Label Width (mm)50.0
Label Height (mm)110.0
Input Configuration
Description
Output Configuration
Common output connector options:
Click to add to your request.
L Type (Coaxial 5.5x2.5mm plug)
C Type (Coaxial 5.5x2.1mm plug)
K Type (Coaxial 3.5x1.3mm plug)
LL Type (5.5x2.5mm Locking 760k type)
CL Type (5.5x2.1mm Locking S761k type)
Magnetic Connector
L Type (Coaxial 5.5x2.5mm plug)C Type (Coaxial 5.5x2.1mm plug)K Type (Coaxial 3.5x1.3mm plug)LL Type (5.5x2.5mm Locking 760k type)CL Type (5.5x2.1mm Locking S761k type)Magnetic Connector
YL3 Type (KPPX-3P)
YL4 Type (KPPX-4P)
EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)
MSB Type (Micro USB)
Custom design
YL3 Type (KPPX-3P)YL4 Type (KPPX-4P)EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)MSB Type (Micro USB)Inquire for custom design

Comprehensive list of GlobTek output cordset options

Contact GlobTek for your specific requirements or custom solutions.