GTD9X1003-WWWVV-TW GTD9X1003-WWWVV-TW, ICT / ITE / Medical Power Supply/Class 2/Household Power Supply, 60601-1-4th Ed. , Desktop/External, DC-DC, , Input Rating: 12-36V, , Output Rating: 100 Watts, Power rating with convection cooling (W) , 12-54V in 0.1V increments, Approvals: China RoHS; Double Insulation; PSE; RoHS; UKCA; Ukraine; VCCI; WEEE; GTD9X1003-WWWVV-TW, ICT / ITE / Medical Power Supply/Class 2/Household Power Supply, 60601-1-4th Ed. , Desktop/External, DC-DC, , Input Rating: 12-36V, , Output Rating: 100 Watts, Power rating with convection cooling (W) , 12-54V in 0.1V increments, Approvals: China RoHS; Double Insulation; PSE; RoHS; UKCA; Ukraine; VCCI; WEEE; Information Model Number GTD9X1003-WWWVV-TW CE EC-Declaration for Medical https://cs.globtek.info/ec_declaration?id=a0O3a00000MvtUoEAJ CE EC-Declaration for Industrial/Commercial/ITE https://cs.globtek.info/ec_declaration?id=a0O3a00000MvtUoEAJ CE EC-Declaration for Household Contact GlobTek for more information UKCA-Declaration for Medical https://cs.globtek.info/ukca_declaration?id=a0O3a00000MvtUoEAJ UKCA-Declaration for Industrial/Commercial/ITE https://cs.globtek.info/ukca_declaration?id=a0O3a00000MvtUoEAJ UKCA-Declaration for Household Contact GlobTek for more information Morocco SDoC Declaration https://cs.globtek.info/Morocco_SDoC_Declaration?id=a0O3a00000MvtUoEAJ RoHS/RoHS3 Declaration https://www.globtek.com/pdf/rohs_cert/a0O3a00000MvtUoEAJ Prop 65 Statement https://en.globtek.com/prop-65-statement.pdf REACH Declaration https://www.globtek.com/pdf/iso_certificates/REACH.pdf Conflict Minerals Declaration https://www.globtek.com/pdf/conflict-minerals.pdf Model Parameters Type Desktop/External Technology DC-DC Category ICT / ITE / Medical Power Supply/Class 2/Household Power Supply Input Voltage Range (V) 12-36V Max Input Current (A) 12.0A Max Output Power Rating (W) 100 Output Voltage Range (V) 12-54 Efficiency Ingress Protection IP43 Size (mm) 149.4 x 62.6 x 33.5 Enclosure Rating Table Preferred ratings shown below. Custom output voltages available in 0.1V increment from the minimum voltage listed to the maximum voltage listed; contact sales.
Model Number (Final ordering #/Part No to be defined) Voltage (V) Current (A) Power (W) RFQ GTD9X1003-10019-TW* 19 5.263 100 RFQ GTD9X1003-10028-TW* 28 3.571 99.99 RFQ GTD9X1003-10022-TW* 22 4.545 99.99 RFQ GTD9X1003-10018-TW* 18 5.55 99.9 RFQ GTD9X1003-10036-TW* 36 2.77 99.72 RFQ GTD9X1003-10024-TW* 24 4.16 99.84 RFQ GTD9X1003-10015-TW* 15 6.666 99.99 RFQ GTD9X1003-6015-TW* 15 4 60 RFQ GTD9X1003-10012-TW* 12 8.33 99.96 RFQ GTD9X1003-10048-TW* 48 2.08 99.84 RFQ GTD9X1003-10030-TW* 30 3.33 99.9 RFQ GTD9X1003-10054-TW* 54 1.85 99.9 RFQ GTD9X1003-WWWVV-TW-XXXX CUSTOM CUSTOM CUSTOM RFQ
* (Final ordering #/Part No to be defined)
Specifications Features 2 x MOPP medical isolation EMS-ready per IEC60601-1-12 Wide "universal" DC input range 120W short-term power capability (optional) Shock & vibration in accordance with IEC60601-1-12 (EMS) Input
Input Voltage Range: 12 - 36VDC (nameplate, nominal) 10.2 - 39.6VDC (rated, -15% / +10%) Plus short-term capability between 9.0 - 10.2V. (Duration is limited by temperature rise.) Input Current: 9.5A (typ.) @ 12VDC 12.0A (max.) @ 10.2VDC No Load Input Power: < 0.5W Efficiency: 87% @ 12VDC, 90% @ 24VDC typ., at a "typical" 60W usage scenario Output
Turn-on Delay: < 2 seconds Output Regulation: +1.5% / -4% max. (measured at the output connector) Line Regulation: ± 0.1 % typ. (measured at the output connector) Ripple: 1% max. (using a 10µF low-ESR electrolytic cap + 0.1µF ceramic cap, measured @ 20MHz BW, at the output connector) Transient Response (Step Load): 10% max. deviation, 2ms max. recovery time (with 100W load step) Transient Response (Load Dump): 5% max. deviation, 100ms max. recovery time (with 100W load dump) Protections
Input Protection: Input line fusing (high-breaking capacity) Reverse polarity protection (up to -36VDC) Input Under-Voltage Protection: Shut down @ 7.4V (typ.), Restore @ 9.0V (max.) Output Over-Voltage Protection: 110 - 130%, Latching, cycle DC input voltage to reset Output Over-Current Protection: 110 - 150%, Auto-recovery Output Short-Circuit Protection: Auto-recovery Over-Temperature Protection: Latching, cycle DC input voltage to reset Environmental
MTBF: > 1,500,000 hours @ 25°C ambient (Telcordia SR-332, Issue 3) Operating Temperature: -10°C to 40°C (100W) Check derating curve for T > 40°C. Storage Temperature: -40°C to 80°C Humidity: 0% to 95% relative humidity, non-condensing Altitude 5000m Cooling: Natural convection Shock: End use handling: Half-sine, <3ms duration, 1.65m/s, 3 shocks per face Transportation simulation: Trapezoid, 60G acceleration, 5.75m/sec, 3 shocks per face General shock: Half-sine, 100G acceleration, 6ms duration, 3 shocks per face Vibration: IEC60601-1-12, Section 10.1.3, Clause B Bump: EN1789, Clause 6.4.1 Drop: EN1789, Clause 6.4.2 Ingress Protection: IP43 RoHS: Complies with EU 2015/863 and China SJ/T 11363-2006 Safety
Compliant Standards: General medical: IEC60601-1 Emergency medical services (EMS): IEC60601-1-12 Information & communications technologies (ICT): IEC62368-1 Dielectric Withstand Voltage (Hi-Pot): 4300VDC from input to output, 1 minute 4300VDC from input to case, 1 minute 500VAC from output to case, 1 minute Output Leakage Current: NC: 8µA max. SFC: 40µA max. Means of Protection (Primary-to-Secondary): 2 x MOPP Protection Class: Class II (reinforced insulation) EMC
Compliant Standards: Medical: IEC60601-1-2 Aftermarket automotive: EN50498 Conducted Emissions: CISPR25, Class 3 (measured with resistive load) Radiated Emissions: CISPR25, Class 3 EN50498 (measured with resistive load) Electrical Transient Conduction Along Supply Lines: ISO7637-2 (Test conditions for 12V nom. / 24V nom. systems, respectively) Test Pulse 1: - 100V / -600V (5,000 pulses) Test Pulse 2a: + 50V / + 50V (5,000 pulses) Test Pulse 2b: + 10V / + 20V (10 pulses) Test Pulse 3a: -150V / - 200V (1 hour) Test Pulse 3b: +100V / + 200V (1 hour) Test Pulse 4: -6V / -12V (1 pulse) ISO16750-2 Load Dump: 12V nom. system: Test Pulse B : Us* = 35V, Ri = 2Ω, td = 400ms 24V nom. system: Test Pulse B: Us* = 65V, Ri = 2Ω, td = 350ms Electrostatic Discharge (ESD) Immunity: EN61000-4-2, 10KV contact discharge, 18KV air discharge, Criterion A Radiated RF Immunity: EN61000-4-3, 20V/m @ 80MHz - 2.7GHz, 80% 1KHz AM, 80% 5Hz AM, Criterion A Conducted RF Immunity: EN61000-4-6, 3VRMS & 6VRMS (ISM & Amateur bands), 80% 1KHz AM, Criterion A Enclosure
Housing: High impact plastic, 94V0 polycarbonate, non-vented Markings: Adhesive backed label or laser engraving Derating Curve Qty (ea.)/Carton 60 Individual Box/Gift Box Size (mm) Egg Crate Individual Box/Gift Box Color Master Carton Size (mm) 480 x 450 x 205 Gross Weight (kg) 15.2 Label Width (mm) 50.0 Label Height (mm) 110.0 Input Configuration Description Output Configuration Common output connector options: Click to add to your request.
L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) Inquire for custom design
For a comprehensive list of options,
Contact GlobTek for your specific requirements or custom solutions.
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.
Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.
Logo Description Medical 4th Ed. EN/IEC 60601-1-2, 4th Edition (Please visit EMC reports for further info) CHINA SJ/T 11364-2014, China RoHS Chart: http://www.globtek.com/pdf/F-GT-DJD-8.4.1-006%20China%20RoHS%20Declaration%205-20-22.pdf Indoor Use Only - Mark is on the label or Molded in the case JAPAN TUV R-PSE, Cert. No. JD 50469658, to J62368-1(H30) , J55032(H29),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: http://en.globtek.com/importing-ite-and-medical-power-supplies-ac-adaptors-to-japan/ RoHS Specifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf UKCA Certification Ukraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf) Japan: Voluntary Control Council for Interference (VCCI) WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case Popular Products (Stock items)
SKU Volts Out Current Out (Amps) Connector RFQ Sample Request 2489487 30.0 3.33 RFQ Sample Request 2489524 36.0 2.77 RFQ Sample Request 2489833 24.0 4.16 RFQ Sample Request 2489587 54.0 1.85 RFQ Sample Request 2489810 12.0 8.33 RFQ Sample Request 2407136 18.0 5.55 RFQ Sample Request 2489571 48.0 2.08 RFQ Sample Request