Preferred ratings shown below. Custom output voltages available in 0.1V increment from the minimum voltage listed to the maximum voltage listed; contact sales.
Model Number (Final ordering #/Part No to be defined)
Voltage (V)
Current (A)
Power (W)
RFQ
GTM9X1001P-10012-T2*
12
8.33
99.96
GTM9X1001P-6015-T2*
15
4
60
GTM9X1001P-10015-T2*
15
6.666
99.99
GTM9X1001P-10018-T2*
18
5.55
99.9
GTM9X1001P-10019-T2*
19
5.26
99.94
GTM9X1001P-10024-T2*
24
4.16
99.84
GTM9X1001P-10030-T2*
30
3.33
99.9
GTM9X1001P-10036-T2*
36
2.77
99.72
GTM9X1001P-10048-T2*
48
2.08
99.84
GTM9X1001P-10054-T2*
54
1.85
99.9
GTM9X1001P-WWWVV-T2-XXXX
CUSTOM
CUSTOM
CUSTOM
* (Final ordering #/Part No to be defined)
Specifications
Features
Aerospace qualified (per RTCA/DO-160G)
IEC60601-1-11 "Home Healthcare" certified @ 80VAC
Extremely low input current distortion
Enhanced immunity capability
Exceptionally low inrush current
Low leakage current @ 400Hz input
Shock & vibration in accordance with IEC60601-1-12 (EMS) & DO-160G
-10°C to 40°C (100W) Check derating curve for T > 40°C.
Storage Temperature:
-40°C to 80°C
Humidity:
0% to 95% relative humidity, non-condensing
Altitude
5000m
Cooling:
Natural convection
Shock:
End use handling: Half-sine, <3ms duration, 1.65m/s, 3 shocks per face Transportation simulation: Trapezoid, 60G acceleration, 5.75m/sec, 3 shocks per face General shock: Half-sine, 100G acceleration, 6ms duration, 3 shocks per face
Vibration:
IEC60601-1-12, Section 10.1.3, Clause B DO-160G, Section 8, Procedure 8.8, Category U, Zone 1A
Bump:
EN1789, Clause 6.4.1
Drop:
EN1789, Clause 6.4.2
Ingress Protection:
IP43
RoHS:
Complies with EU 2015/863 and China SJ/T 11363-2006
Safety
Compliant Standards:
General medical: IEC60601-1 Home healthcare: IEC60601-1-11 (2-conductor input models only) Emergency medical services (EMS): IEC60601-1-12 (2-conductor input models only) Information & communications technologies (ICT): IEC62368-1
Dielectric Withstand Voltage:
4000VAC or 5656VDC from input to output 10mA, 1 minute
EN55032/CISPR11, Class B DO-160G, Section 21.4, Category M (measured with resistive load)
Radiated Emissions:
EN55032/CISPR11, Class B DO-160G, Section 21.5, Category M (measured with resistive load)
Harmonic Current Voltage Distortion:
EN61000-3-2, Class A Meets DO-160G, Section 16.7.1.2 for A(CF) equipment
Voltage Fluctuations/Flicker:
EN61000-3-3
Electrostatic Discharge (ESD) Immunity:
EN61000-4-2, 10KV contact discharge, 18KV air discharge, Criterion A DO-160G, Section 25.5, Category A
Radiated RF Immunity:
EN61000-4-3, 20V/m @ 800MHz - 2.7GHz, 80% 1KHz AM, 80% 5Hz AM, Criterion A DO-160G, Section 20.5, Category R
EFT/Burst Immunity:
EN61000-4-4, 4KV/100KHz., Criterion A
Line Surge Immunity:
EN61000-4-5, 2KV differential-mode, 4KV common-mode, Criterion A
Conducted RF Immunity:
EN61000-4-6, 3VRMS & 6VRMS, 80% 1KHz AM, Criterion A DO-160G, Section 20.4, Category R
Power Frequency Magnetic Field Immunity:
EN61000-4-8, 30A/m, Criterion A DO-160G, Section 19.3, Category ZC
Voltage Dip Immunity:
EN61000-4-11, 20ms 100% dip @ Criterion A, 500ms 30% dip @ Criterion B, 5sec 100% dip @ Criterion B DO-160G for A(CF) equipment
Enclosure
Housing:
High impact plastic, 94V0 polycarbonate, non-vented
Markings:
Adhesive backed label or laser engraving
Derating Curve
Qty (ea.)/Carton
60
Individual Box/Gift Box Size (mm)
Egg Crate
Individual Box/Gift Box Color
Master Carton Size (mm)
480 x 450 x 205
Gross Weight (kg)
15.2
Label Width (mm)
50.0
Label Height (mm)
110.0
Input Configuration
Description
IEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka "Figure-8")
Mates with IEC 60320/C7 Plug
Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Please contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.
Contact GlobTek for your specific requirements or custom solutions.
Approvals
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.
Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.
Logo
Description
Medical 4th Ed.
EN/IEC 60601-1-2, 4th Edition (Please visit EMC reports for further info)
RoHS
Specifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
No Logo Applicable
CB for IEC 60601-1:2005 (Third Edition) + CORR. 1 (2006) + CORR. 2 pending (2007) + AM1 (2012) or IEC 60601-1 (2012 reprint) (Ed 3.1) up to 48V only
CHINA SJ/T 11364-2014, China RoHS Chart: http://www.globtek.com/pdf/F-GT-DJD-8.4.1-006%20China%20RoHS%20Declaration%205-20-22.pdf
JAPAN TUV R-PSE, Cert. No. JD 50469658, to J62368-1(H30) , J55032(H29),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations: https://www.globtek.com/r2/Szj4Vb
JAPAN TUV R-PSE, Cert. No. JD 50469658, to J62368-1(H30) , J55032(H29),J3000(H25)[DC15?30V]. Please reference the following website for guidelines on PSE regulations: https://www.globtek.com/r2/Szj4Vb
Indoor Use Only - Mark is on the label or Molded in the case
Medical Elec. Equip.- Part 1-11: Gen. Req. For Basic Safety & Essential Perf.- Collateral Standard - Req. For Medical Elec. Equip. & Medical Elec. Systems Used In The Home Healthcare Environment [IEC 60601- 1-11:2015 Ed.2] (pending)
JAPAN TUV R-PSE, Cert. No. JD 50469658, to J62368-1(H30) , J55032(H29),J3000(H25)[DC30?60V]. Please reference the following website for guidelines on PSE regulations: https://www.globtek.com/r2/Szj4Vb
Japan: Voluntary Control Council for Interference (VCCI)
WEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Declaration ДС № ЕАЭС N RU Д-US.КА01.В.10453_19 Custom Union of Russia, Belarus and Kazakhstan http://www.globtek.com/redirect/?loc=gost-certificate-eac-declaration