GTD9X1003-WWWVV-TW Desktop/External ICT / ITE / Medical Power Supply/Class 2/Household Power Supply

GTD9X1003-WWWVV-TW, ICT / ITE / Medical Power Supply/Class 2/Household Power Supply,  60601-1-4th Ed. , Desktop/External, DC-DC, , Input Rating: 12-36V, , Output Rating: 100 Watts, Power rating with convection cooling (W) , 12-54V in 0.1V increments, Approvals: China RoHS; Double Insulation; PSE; RoHS; UKCA; Ukraine; VCCI; WEEE;GTD9X1003-WWWVV-TW, ICT / ITE / Medical Power Supply/Class 2/Household Power Supply, 60601-1-4th Ed. , Desktop/External, DC-DC, , Input Rating: 12-36V, , Output Rating: 100 Watts, Power rating with convection cooling (W) , 12-54V in 0.1V increments, Approvals: China RoHS; Double Insulation; PSE; RoHS; UKCA; Ukraine; VCCI; WEEE;
Model NumberGTD9X1003-WWWVV-TW
CE EC-Declaration for Medical
CE EC-Declaration for Industrial/Commercial/ITE
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for Medical
UKCA-Declaration for Industrial/Commercial/ITE
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declaration
RoHS/RoHS3 Declaration
Prop 65 Statement
REACH Declaration
Conflict Minerals Declaration
Model Parameters
CategoryICT / ITE / Medical Power Supply/Class 2/Household Power Supply
Input Voltage Range (V)12-36V
Max Input Current (A)12.0A
Max Output Power Rating (W)100
Output Voltage Range (V)12-54
Ingress ProtectionIP43
Size (mm)149.4 x 62.6 x 33.5

User-added image

Rating Table
Preferred ratings shown below.
Custom output voltages available in 0.1V increment from the minimum voltage listed to the maximum voltage listed; contact sales.
Model Number (Final ordering #/Part No to be defined)Voltage (V)Current (A)Power (W)RFQ
* (Final ordering #/Part No to be defined)



  • 2 x MOPP medical isolation
  • EMS-ready per IEC60601-1-12
  • Wide "universal" DC input range
  • 120W short-term power capability (optional)
  • Shock & vibration in accordance with IEC60601-1-12 (EMS)


Input Voltage Range:12 - 36VDC (nameplate, nominal)
10.2 - 39.6VDC (rated, -15% / +10%)

Plus short-term capability between 9.0 - 10.2V. (Duration is limited by temperature rise.)
Input Current:9.5A (typ.) @ 12VDC
12.0A (max.) @ 10.2VDC
No Load Input Power:< 0.5W
Efficiency:87% @ 12VDC, 90% @ 24VDC typ., at a "typical" 60W usage scenario


Turn-on Delay:< 2 seconds
Output Regulation:+1.5% / -4% max. (measured at the output connector)
Line Regulation:± 0.1 % typ.  (measured at the output connector)
Ripple:1% max. (using a 10µF low-ESR electrolytic cap + 0.1µF ceramic cap, measured @ 20MHz BW, at the output connector)
Transient Response (Step Load):10% max. deviation, 2ms max. recovery time (with 100W load step)
Transient Response
(Load Dump):
5% max. deviation, 100ms max. recovery time (with 100W load dump)


Input Protection:Input line fusing (high-breaking capacity)
Reverse polarity protection (up to -36VDC)
Input Under-Voltage Protection:Shut down @ 7.4V (typ.), Restore @ 9.0V (max.)
Output Over-Voltage Protection:110 - 130%, Latching, cycle DC input voltage to reset
Output Over-Current Protection:110 - 150%, Auto-recovery
Output Short-Circuit Protection:Auto-recovery
Over-Temperature Protection:Latching, cycle DC input voltage to reset


MTBF:> 1,500,000 hours @ 25°C ambient (Telcordia SR-332, Issue 3)
Operating Temperature:-10°C to 40°C (100W)
Check derating curve for T > 40°C.
Storage Temperature:-40°C to 80°C
Humidity:0% to 95% relative humidity, non-condensing
Cooling:Natural convection
Shock:End use handling: Half-sine, <3ms duration, 1.65m/s, 3 shocks per face
Transportation simulation: Trapezoid, 60G acceleration, 5.75m/sec, 3 shocks per face
General shock: Half-sine, 100G acceleration, 6ms duration, 3 shocks per face
Vibration:IEC60601-1-12, Section 10.1.3, Clause B
Bump:EN1789, Clause 6.4.1
Drop:EN1789, Clause 6.4.2
Ingress Protection:IP43
RoHS:Complies with EU 2015/863 and China SJ/T 11363-2006


Compliant Standards:General medical: IEC60601-1
Emergency medical services (EMS): IEC60601-1-12
Information & communications technologies (ICT): IEC62368-1
Dielectric Withstand Voltage (Hi-Pot):4300VDC from input to output,  1 minute
4300VDC from input to case, 1 minute
500VAC from output to case, 1 minute
Output Leakage Current:NC: 8µA max.
SFC: 40µA max.
Means of Protection (Primary-to-Secondary):2 x MOPP
Protection Class:Class II (reinforced insulation)


Compliant Standards:Medical: IEC60601-1-2
Aftermarket automotive: EN50498
Conducted Emissions:CISPR25, Class 3
(measured with resistive load)
Radiated Emissions:CISPR25, Class 3
(measured with resistive load)
Electrical Transient Conduction Along Supply Lines:ISO7637-2 (Test conditions for  12V nom.  / 24V nom. systems, respectively)
   Test Pulse 1:  - 100V / -600V (5,000 pulses)
   Test Pulse 2a: + 50V / + 50V (5,000 pulses)
   Test Pulse 2b: + 10V / + 20V (10 pulses)
   Test Pulse 3a: -150V / - 200V (1 hour)
   Test Pulse 3b: +100V / + 200V (1 hour)
   Test Pulse 4: -6V / -12V (1 pulse)

ISO16750-2 Load Dump:
   12V nom. system: Test Pulse B : Us* = 35V, Ri = 2Ω, td = 400ms
   24V nom. system: Test Pulse B:  Us* = 65V, Ri = 2Ω, td = 350ms
Electrostatic Discharge (ESD) Immunity:EN61000-4-2, 10KV contact discharge, 18KV air discharge, Criterion A
Radiated RF Immunity:EN61000-4-3, 20V/m @ 80MHz - 2.7GHz, 80% 1KHz AM, 80% 5Hz AM, Criterion A
Conducted RF Immunity:EN61000-4-6, 3VRMS & 6VRMS (ISM & Amateur bands), 80% 1KHz AM, Criterion A


Housing:High impact plastic, 94V0 polycarbonate, non-vented
Markings:Adhesive backed label or laser engraving
Derating CurveUser-added image
Qty (ea.)/Carton60
Individual Box/Gift Box Size (mm)Egg Crate
Individual Box/Gift Box Color
Master Carton Size (mm)480 x 450 x 205
Gross Weight (kg)15.2
Label Width (mm)50.0
Label Height (mm)110.0
Input Configuration
Output Configuration
Common output connector options:
Click to add to your request.
L Type (Coaxial 5.5x2.5mm plug)
C Type (Coaxial 5.5x2.1mm plug)
K Type (Coaxial 3.5x1.3mm plug)
LL Type (5.5x2.5mm Locking 760k type)
CL Type (5.5x2.1mm Locking S761k type)
Magnetic Connector
L Type (Coaxial 5.5x2.5mm plug)C Type (Coaxial 5.5x2.1mm plug)K Type (Coaxial 3.5x1.3mm plug)LL Type (5.5x2.5mm Locking 760k type)CL Type (5.5x2.1mm Locking S761k type)Magnetic Connector
YL3 Type (KPPX-3P)
YL4 Type (KPPX-4P)
EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)
MSB Type (Micro USB)
Custom design
YL3 Type (KPPX-3P)YL4 Type (KPPX-4P)EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)MSB Type (Micro USB)Inquire for custom design

Comprehensive list of GlobTek output cordset options

Contact GlobTek for your specific requirements or custom solutions.


Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

Medical 4th Ed.EN/IEC 60601-1-2, 4th Edition (Please visit EMC reports for further info)
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart:
User-added imagenull
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
User-added imageJAPAN TUV R-PSE, Cert. No. JD 50469658, to J62368-1(H30) , J55032(H29),J3000(H25)[15V or less]. Please reference the following website for guidelines on PSE regulations:
RoHSSpecifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3)
User-added imageUKCA Certification
User-added imageUkraine UKRSepro (Document:
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU ( Mark is on the label or Molded in the case
Request Info