|
XXX = OUTPUT CONNECTOR TYPE & POLARITY:
A00 = NO CONNECTOR; SPLIT/STRIP
N05 = 5-PIN DIN MALE
C = 5.5mm X 2.1mm FEMALE BARREL
K = 3.5mm X 1.3mm FEMALE BARREL
L = 5.5mm X 2.5mm FEMALE BARREL
S = 2.5mm MALE PLUG
P = 3.5mm MALE PLUG
CP = CENTER POSITIVE
CN = CENTER NEGATIVE
TP = TIP POSITIVE
TN = TIP NEGATIVE
|
General Specifications:
Input Voltage/ Frequency: 125VAC or less/ 50Hz and 60Hz
Input Capacity: Exceeding 20VA, and less than or equal to 30VA
Output Tolerance: +/-5% at full load
Protection: Primary Current (2)/ Thermal (1) Fuses
Configuration: Step Down Line Transformer with Rectifier-Capacitor
Input Filter, JAPAN Wall Plug-in
Operating Temperature: 0°-40°C
Humidity: 0%-90% R.H., non-condensing
Storage Temperature: -20°-70°C
Dielectric Strength: : 4000VAC pri-sec
1500VAC pri & sec-ground
Spacing: 8.0mm primary-secondary
Leakage and Patient Auxiliary Current: Less than 0.100mA
Enclosure: Black Polycarbonate, UL94V-0
Cooling: Thermal Convection, no-vents
Cords: 6 ft. 2 conductor, 24-18AWG Output;
Safety: ITE/Medical Models: DENAN
EMI: FCC Class B
Notes:
1) Models with suffix (1) are readily available from GlobTek or distributor
stock.
2) Within each Model, Output Current may vary in 50mA increments, preserving
Output Voltage +/-5% Tolerance, while the Input Capacity
is larger than 20VA and less or equal with 30VA.
3) For unit size and output cords please refer to page no.___
UNIT SIZE CODES:
ZZ: Wall Plug Case Style. Please refer to page no_____
Input Blade Style:
01: JAPAN Input Blade Style
02: JAPAN 3 Prong
Options:
1. Primary Earth ground PIN and secondary/shield ground
2. Custom output cords, connectors and shielding arrangements
3. Other outputs or custom design per customer specifications
SCHEMATIC DIAGRAM:
(UNDER CONSTRUCTION)
AC Input: DC
Output:
100VAC
3.0VDC- 28VDC
50/60Hz 300mA-2500mA
1. Housing:
W-Wall
Plug-in;
2. Output:
D
- DC Unregulated
3. Input:
4-100VAC,50/60Hz;
4. Input Plug Configuration:
9-JAPAN
2 prong; A-JAPAN
3 prong;
5. Output Voltage:
Q:3V;A:5V;B:6V;C:7.5V;D:9V;U:10V;E:12V;
F:14V;G:15V;H:18V;Z:20V;I:24V;R:28V;
1) 41,48,57:
Transformer Core Size
6,7,8.
Output Voltage Deviation:
Subtracting X.X
Volts from Standard Output Voltage
9,10,11,12. Output Current:
YYYY: Milliamps
or Y.YY: Amps
13,14. Output Plug/Cord Options:
A-,C-,D-,F-,G-,H-,L-,M-,N-,P-,Q-,S-,T-,U-,V-,W-,X-,Y-.
15,16. Plug Wiring:
CP: Center Positive;
CN:
Center Negative;
TP: Tip positive
TN: Tip Negative
17: Manufacturing Code:
-x: Internal Code
18,19: Custom Label: Alphanumeric
20,21,22: ITE/Medical Unit: -: ITE; MED:
Medical
|
